Storia UE BOOM 2 Speaker Replacement Passo n. 4

Modifiche al passo #4

Modifica di Keegan Divine — 25 feb 2018

Modifica approvata da Keegan Divine

-	[* ~~black~~] ~~Using~~ the ~~PH2 bit~~, unscrew the 4 screws on the ~~bottom of~~ the ~~speaker~~. ~~(Circled in red)~~
+	[* red] On the bottom, unscrew the four 15mm Phillips Head #2 screws, using the Phillips Head #2 bit (labeled PH2 in the Pro Tech Toolkit).
	[* black] Pry up at the location marked, and remove the plastic end cap