Modifiche al passo #3
Modifica di Venancio Zuniga —
Modifica approvata da Venancio Zuniga
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Pry open the case at the bottom. |
|---|---|
| - | [* icon_caution] Avoid using excessive force which could damage the top two retention tabs. |
| - | [* black] Slide the backplate towards the bottom of the meter. |
| - | [* black] Remove the backplate from the main case. |
| + | [* black] Pry the case apart at the bottom to make it easy to work with. |
| + | [* icon_note] A Flathead 3/32 Screwdriver may help with this. |
| + | [* icon_caution] Avoid using excessive force when lifting the backplate, this could damage the two top retention tabs. |
| + | [* black] Slide the backplate towards the bottom of the meter, freeing it from the two top retention tabs. |
| + | [* icon_note] You only need to slide the case apart a little bit to free the backplate from the two top retention tabs. |
| + | [* black] Remove the backplate and store it in a safe place with your screws |