Modifiche al passo #2
Modifica di Venancio Zuniga —
Modifica approvata da Venancio Zuniga
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Remove the |
|---|---|
| + | [* black] Remove the first screw from the backplate using a Phillips #0 Screwdriver. |
| [* icon_reminder] Turn the screws counter clockwise to remove them, and turn the screws clockwise will re-insert them. | |
| - | [* black] Store the two screws in a safe place. |
| - | [* icon_note] Using a bowl, container with a lid, or a magnet to hold and keep track of your screws is always good practice |
| + | [* black] Store the first screw in a safe place. |
| + | [* icon_note] Using a bowl, container with a lid, or a magnet to hold and keep track of your screws is always good practice. |
| + | [* black] Repeat this process for the second screw. |
| + | [* icon_note] Sometimes the fuse will not want to pop or fall out of the hole. If you keep trying to unscrew the screw, and you feel a very subtle popping effect coming from the screw, this means the screw is free. You can try smacking the back of the meter against your hand to try and pop the screw free. |