Salta al contenuto principale

Introduzione

How to replace the Keyboard on Toshiba Satellite, series 850.

The video manual is for cleaning the cooling system, but you can follow it, because at the beginning you can see how to disassemble the keyboard.


Please SUBSCRIBE to my channel ツ

Parti

Nessuna parte specificata.

Panoramica Video

  1. Switch-off the laptop and remove the battery. Switch-off the laptop and remove the battery.
    • Switch-off the laptop and remove the battery.

  2. The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them. The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them. The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them.
    • The Keyboard is held by 7x locking clips. Use cutter and plastic tools to unlock them.

  3. Disconnect the old Keyboard and you are ready to install the new one. To remove or re-insert the keyboard ribbon, simply flip the locking clip upwards to unlock and downwards to lock the ribbon. Alternatively, you may pull it outwards with a fingernail.
    • Disconnect the old Keyboard and you are ready to install the new one.

    • To remove or re-insert the keyboard ribbon, simply flip the locking clip upwards to unlock and downwards to lock the ribbon. Alternatively, you may pull it outwards with a fingernail.

    • .

    • Please SUBSCRIBE to my channel ツ

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 12 persone hanno completato questa guida.

ZFix

Membro da: 09/12/2013

178.495 Reputazione

315 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

297 Membri

982 Guide realizzate

Where does the 4-pin ribbon cable for a backlit keyboard connect?

thomja1 - Replica

I want new keyboard, where can i get that ?

Eswara Prasad - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 60

Tutti i Tempi: 11,465