1. Push the left tab with your left hand.
    • Push the left tab with your left hand.

    • Then push the right tab with your right hand.

    • While your right hand is still pushing, remove the battery with your left hand.

  2. Remove one JIS #000 screw.
    • Remove one JIS #000 screw.

    • This screw does not come out all the way, but you will still be able to open the back panel.

    • Use the plastic opening tool to pry the panel open. Be sure to do this on all four sides. Then the panel will lift off.

    • Take the nylon spudger, and push the prongs so that it releases the RAM.

    • Once the RAM has lifted, use tweezers or fingers to pull it out.


To reassemble your device, follow these instructions in reverse order.

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 8

Tutti i Tempi: 71