Introduzione

This guide teaches you how to replace the screen for the Toshiba Satellite A305-S6848

Parti

Nessuna parte richiesta.

  1. Close laptop and turn it upside down.
    • Close laptop and turn it upside down.

  2. Move the left locking hatch to the left.
    • Move the left locking hatch to the left.

    • Hold the right spring latch to the right.

  3. Carefully remove the battery from the laptop.
    • Carefully remove the battery from the laptop.

  4. Remove the 6 rubber tabs on the housing using the metal spudger. Remove the 6 rubber tabs on the housing using the metal spudger.
    • Remove the 6 rubber tabs on the housing using the metal spudger.

  5. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  6. Remove the six 5.8 mm screws using the Phillip's #0 screwdriver. Remove the six 5.8 mm screws using the Phillip's #0 screwdriver.
    • Remove the six 5.8 mm screws using the Phillip's #0 screwdriver.

  7. Pry out plastic housing on all sides.
    • Pry out plastic housing on all sides.

  8. Pry out the bottom left and right locking pieces of the plastic housing with the metal spudger. Pry out the bottom left and right locking pieces of the plastic housing with the metal spudger.
    • Pry out the bottom left and right locking pieces of the plastic housing with the metal spudger.

  9. Remove the four 5.8 mm screws using the Phillip's #0 screwdriver. Remove the four 5.8 mm screws using the Phillip's #0 screwdriver.
    • Remove the four 5.8 mm screws using the Phillip's #0 screwdriver.

  10. Remove the eight 6.5 mm screws on the left and right sides of the screen using the Phillip's #0 screwdriver.
    • Remove the eight 6.5 mm screws on the left and right sides of the screen using the Phillip's #0 screwdriver.

  11. Pull the screen down. Pull off tape and take our video connector.
    • Pull the screen down.

    • Pull off tape and take our video connector.

  12. Remove cold cathode fluorescent light bulb connector.
    • Remove cold cathode fluorescent light bulb connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Joshua E Hong

Membro da: 06/11/2017

449 Reputazione

4 Guide realizzate

Team

Baylor, Team S8-G1, Johnson Fall 2017 Membro di Baylor, Team S8-G1, Johnson Fall 2017

BU-JOHNSON-F17S8G1

2 Membri

4 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 114