The Claw Item Replacement

Alain Pierre e 2 altri collaboratori

Ultimo aggiornamento il February 11, 2024

5 - 10 minuti

Facile

Prerequisiti Non Soddisfatti

Introduzione

Vai al passo 1

After repeated use of the claw machine, eventually you will run out of toys or candy to grab. In order to complete this task you will need to remove the top cover of your claw machine. Follow this user friendly guide to assist you with this task.

Cosa ti serve

Ricambi

Strumenti

Phillips #1 Screwdriver

Mostra di più…

Passo 1 Top Cover

The Claw Item Replacement, Top Cover: passo 1, immagine 1 di 1

Place The Claw machine in the up-right position with the control knobs facing you.

Modifica

Passo 2

Turn The Claw machine upside-down placing the top cover on the surface of your work area.

Modifica

Passo 3

Remove all ten 6mm phillips #1 screws underneath the top cover using your #1 phillips head screwdriver.
It is helpful to choose a clear, well lit work space. There are multiple tiny screws that are easy to lose.

Modifica

Passo 4

Turn The Claw machine back to the upright position with controls facing you.

Modifica

Passo 5

Remove the top cover of The Claw machine.

Modifica

Passo 6

Remove the ten 6 mm phillips #1 screws from the top flange.

Modifica

Passo 7

Lift the flange upward and off to the side of the machine.
There is enough wire connecting the flange to the machine that you will not need to cut the wire. The flange can be moved off to the side of the machine while you are working.
Cutting or ripping out the wire will cause damage to the machine so try not to put much tension on the wire.