Salta al contenuto principale
TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement

TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement

masato tsuchida

masato tsuchida e 2 altri collaboratori

Ultimo aggiornamento il January 8, 2023

5 minuti
Facile

Introduzione

Vai al passo 1

This guide will walk you through the necessary steps for replacing the power jack on your Toshiba Satelite E45W-C4200X.

The power jack has been a common problem with the Toshiba Satellite laptops and the replacement is quick and relatively inexpensive.

Before using this guide, make sure to review the troubleshooting page to ensure this replacement is necessary.

Make sure to power off your laptop completely and disconnect from any external power source prior to beginning the process.

Cosa ti serve

Ricambi

Strumenti

Mostra di più…

  1. TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement, DC Power Jack: passo 1, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement, DC Power Jack: passo 1, immagine 2 di 2
    • Remove the ten 1 mm screws that secure the back cover using a Phillip's #1 screwdriver.

  2. TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement: passo 2, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement: passo 2, immagine 2 di 2
    • Use plastic opening tool to separate the back cover from the laptop.

    • Go slowly and be careful as the plastic can crack.

    • It is recommended that you start from a corner and run the tool along the edge

  3. TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement: passo 3, immagine 1 di 2 TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement: passo 3, immagine 2 di 2
    • Using a Phillips # 1 screwdriver, remove the three screws holding the bracket over the ports on the right side.

    • Remove the bracket.

  4. TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement: passo 4, immagine 1 di 3 TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement: passo 4, immagine 2 di 3 TOSHIBA Satellite E45W-C4200X DC Power Jack Replacement: passo 4, immagine 3 di 3
    • Unplug the power cable harness from the motherboard.

    • Lift the power jack out of its slot in the top right corner.

    • Remove the cable.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Un commento

Thanks for this. Great help in sorting out my laptop.

Jack - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 647