Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

  1. Tools you will need is the Phillips #00 precision screwdriver, Plastic Opening Tools, and tweezers. Insert plastic opening tool in the corner of device and slide along edges to separate adhesive. Remove cover
    • Tools you will need is the Phillips #00 precision screwdriver, Plastic Opening Tools, and tweezers.

    • Insert plastic opening tool in the corner of device and slide along edges to separate adhesive.

    • Remove cover

  2. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  3. Remove tape connecting front camera to motherboard and then disconnect the camera from the port. Lift the camera from the right and simply wiggle out of the slot. Lift the camera from the right and simply wiggle out of the slot.
    • Remove tape connecting front camera to motherboard and then disconnect the camera from the port.

    • Lift the camera from the right and simply wiggle out of the slot.

  4. Disconnect the back camera from the port located in the upper right corner. Lift up the camera cable using the tweezers. Wiggle out camera from the slot.
    • Disconnect the back camera from the port located in the upper right corner.

    • Lift up the camera cable using the tweezers.

    • Wiggle out camera from the slot.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Martin Luna

Membro da: 24/09/2014

1.732 Reputazione

5 Guide realizzate

Team

USF Tampa, Team 15-6, Remmell Fall 2014 Membro di USF Tampa, Team 15-6, Remmell Fall 2014

USFT-REMMELL-F14S15G6

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 14

Tutti i Tempi: 2,757