/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi
Unisciti alla più grande community di riparazione al mondo
Realigning 12-Inch Bionaire Fan Metal Coil

Realigning 12-Inch Bionaire Fan Metal Coil

Hemish Patel

Hemish Patel e 2 altri collaboratori

Ultimo aggiornamento il February 19, 2016

15 minuti
Facile

Introduzione

Vai al passo 1

Annoyed by the fact that your fan won't stay in a desired, fixed position? This fast fix guide will help correct that problem in no time!

Cosa ti serve

Strumenti

iFixit guadagna commissioni quando acquisti tramite questi link.

  1. Realigning 12-Inch Bionaire Fan Metal Coil, Realigning 12-Inch Bionaire Fan Metal Coil: passo 1, immagine 1 di 2 Realigning 12-Inch Bionaire Fan Metal Coil, Realigning 12-Inch Bionaire Fan Metal Coil: passo 1, immagine 2 di 2

    • Unlock all of the tabs holding the fan cage together.

    • Carefully pull off the cage.

    Traduci

  2. Realigning 12-Inch Bionaire Fan Metal Coil: passo 2, immagine 1 di 2 Realigning 12-Inch Bionaire Fan Metal Coil: passo 2, immagine 2 di 2

    • Using a Phillips #2 screwdriver, untighten the 1/4'' screw that is located underneath the fan blade.

    • Blade may be sharp so watch out!

    • Cautiously remove the blade from the hinge.

    • Put the screws in a cup so you don't lose them!

    Traduci

  3. Realigning 12-Inch Bionaire Fan Metal Coil: passo 3, immagine 1 di 2 Realigning 12-Inch Bionaire Fan Metal Coil: passo 3, immagine 2 di 2

    • Rotate the black cap counter-clockwise to disconnect it from the back fan cage.

    • Pull off the back cage from the engine holder.

    Traduci

  5. Realigning 12-Inch Bionaire Fan Metal Coil: passo 4, immagine 1 di 1

    • Working with the Phillips #2 screwdriver, loosen the 1/4'' center hinge screw from the metal base.

    Traduci

  6. Realigning 12-Inch Bionaire Fan Metal Coil: passo 5, immagine 1 di 2 Realigning 12-Inch Bionaire Fan Metal Coil: passo 5, immagine 2 di 2

    • Using the Phillips #2 screwdriver, separate the wire holder from the back of black cover by removing the two 1/8'' screws.

    Traduci

  7. Realigning 12-Inch Bionaire Fan Metal Coil: passo 6, immagine 1 di 2 Realigning 12-Inch Bionaire Fan Metal Coil: passo 6, immagine 2 di 2

    • Pull of the black knob by rotating the knob counter-clockwise.

    • Pull down the black cover all the way.

    • The coil may pop out after removing the cover.

    Traduci

  8. Realigning 12-Inch Bionaire Fan Metal Coil: passo 7, immagine 1 di 2 Realigning 12-Inch Bionaire Fan Metal Coil: passo 7, immagine 2 di 2

    • Take out the gold metal spring.

    • Realign the metal coil into designated space.

    • Push the coil in with some force so it rests perfectly in the space.

    • To make placing the coil back in more easier, use the screwdriver!

    Traduci

  9. Realigning 12-Inch Bionaire Fan Metal Coil: passo 8, immagine 1 di 2 Realigning 12-Inch Bionaire Fan Metal Coil: passo 8, immagine 2 di 2

    • Align the end of the metal coil into the same hole the black wire comes out of in the black cover from step 6.

    • This can be a frustrating step. Be patient!

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

Hemish Patel

Membro da: 09/29/15

231 Reputazione

1 Guida realizzata

Distintivi: 5

+2 altri distintivi

Team

Cal Poly, Team 10-3, Green Fall 2015 Membro di Cal Poly, Team 10-3, Green Fall 2015

CPSU-GREEN-F15S10G3

4 Membri

4 Guide realizzate

Un commento

I have a fan It hum I have to spin the blade for it to start spin

Chris - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 15

Tutti i Tempi: 3,936