Salta al contenuto principale
Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement

Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement

Miranda Brinkley

Miranda Brinkley e 2 altri collaboratori

Ultimo aggiornamento il December 14, 2018

5 minuti
Facile

Introduzione

Vai al passo 1

Is your drone controller not lighting up? A possible cause could be dead batteries. Follow these steps to learn how to replace the batteries. No tools are required because the screwdriver in included in the remote control.

  1. Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement, Remote Control Battery: passo 1, immagine 1 di 1
    • On the right side of the controller, slide the small screw driver out.

  2. Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement: passo 2, immagine 1 di 1
    • Flip the controller over, so the black panels are facing up.

  3. Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement: passo 3, immagine 1 di 2 Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement: passo 3, immagine 2 di 2
    • Unscrew the small screw on the left bottom side. The screw should be on the plastic piece that has an upwards facing arrow.

    • Repeat for the screw on the bottom right hand side.

  4. Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement: passo 4, immagine 1 di 1
    • Pull the plastic piece off to reveal the compartment where the batteries go.

  5. Propel Star Wars T-65 X-Wing Drone Remote Control Battery Replacement: passo 5, immagine 1 di 1
    • Remove the old batteries.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

UC Davis, Team S11-G5, Lore Fall 2018 Membro di UC Davis, Team S11-G5, Lore Fall 2018

UCD-LORE-F18S11G5

3 Membri

3 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 34

Tutti i Tempi: 2,565