Philips Norelco BeardTrimmer 3100 Battery Replacement

Ultimo aggiornamento il July 15, 2024

5 minuti

Moderato

Introduzione

When the battery dies completely and no longer holds a charge, this guide will illustrate the proper way of removing the battery for replacement. CAUTION. Please do not throw away the dead battery in the trash. See a proper disposal center for any handling of dead batteries.

Cosa ti serve

Ricambi

Philips Norelco BeardTrimmer 3100 Battery
Link affiliato
Disponibile in vendita su Amazon
Visualizza

Strumenti

Mostra di più…

iFixit guadagna commissioni quando acquisti tramite questi link.

Passo 1 Front and Back Panels

Philips Norelco BeardTrimmer 3100 Battery Replacement, Front and Back Panels: passo 1, immagine 1 di 1

Remove the comb from the top of the trimmer.

Traduci

Passo 2

Place your thumb underneath the blade and push upward to remove it.

Traduci

Passo 3

Hold trimmer towards you as shown in the diagram.
Insert your prying tool/metal spudger into the marked area.

Traduci

Passo 4

Philips Norelco BeardTrimmer 3100 Battery Replacement: passo 4, immagine 3 di 3

Apply gentle pressure and begin prying open the back panel.
Separate the panel one notch at a time. Listen carefully as you're prying the panel apart and notice each individual notch release.

Traduci

Passo 5

Philips Norelco BeardTrimmer 3100 Battery Replacement: passo 5, immagine 3 di 3

Pull the trimmer apart using your hands once the panel is at least halfway apart.
Pull the wires attached to the battery off of the power connectors before completely removing the back panel.

Traduci

Passo 6

Hold the trimmer towards you.
Place the metal spudger tool in the marked area.

Traduci

Passo 7

Apply gentle pressure and begin prying the front panel.
Separate the front panel one notch at a time.

Traduci

Passo 8

Pull the trimmer apart using your hands once the panel is at least halfway apart.

Traduci

Passo 9 Battery

Philips Norelco BeardTrimmer 3100 Battery Replacement, Battery: passo 9, immagine 1 di 3

Philips Norelco BeardTrimmer 3100 Battery Replacement, Battery: passo 9, immagine 2 di 3

Philips Norelco BeardTrimmer 3100 Battery Replacement, Battery: passo 9, immagine 3 di 3

Face the battery towards you.
Locate the power connectors on the bottom of the trimmer, pull them from the base with your spudger.

Traduci

Passo 10

Grab the battery by its sides, pull it upwards out of the base of the trimmer.

Traduci

Passo 11

Locate the connection between the blue wire and the battery. Melt the solder and completely remove the battery.
Be careful when dealing with solder. The metals will become very hot and can cause damage to skin/clothing.

Traduci