/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi
Unisciti alla più grande community di riparazione al mondo
Panasonic KX-E603 Fuse Replacement

Panasonic KX-E603 Fuse Replacement

Lindsay Stratis

Lindsay Stratis e 4 altri collaboratori

Ultimo aggiornamento il June 24, 2015

Nessuna stima
Moderato
Dettagli Mancanti

Introduzione

Vai al passo 1

This guide will demonstrate how to replace the fuse on your typewriter, step-by-step.

Cosa ti serve

Strumenti

  • Spudger
    Spudger

  1. Panasonic KX-E603 Fuse Replacement, Case: passo 1, immagine 1 di 2 Panasonic KX-E603 Fuse Replacement, Case: passo 1, immagine 2 di 2

    • Flip the typewriter to expose the bottom body panel.

    • Be careful to not damage the top surface of the typewriter when you rest it upside-down.

    Traduci

  2. Panasonic KX-E603 Fuse Replacement: passo 2, immagine 1 di 1

    • Remove the three 19 mm screws located in the recessed holes on the edge of the black underside panel using a Phillips #2 screwdriver.

    Traduci

  3. Panasonic KX-E603 Fuse Replacement: passo 3, immagine 1 di 1

    • Flip the typewriter back to its original orientation, then rotate it so that the rear is facing towards you.

    • Remove the three 19 mm screws near the bottom of the tan body panel using a Phillips #2 screwdriver.

    Traduci

  4. Panasonic KX-E603 Fuse Replacement: passo 4, immagine 1 di 2 Panasonic KX-E603 Fuse Replacement: passo 4, immagine 2 di 2

    • Open the typewriter lid and push the carriage away to expose the two screws holding the case to the chassis.

    • Remove the two 19 mm screws using a Phillips #2 screwdriver.

    Traduci

  6. Panasonic KX-E603 Fuse Replacement: passo 5, immagine 1 di 2 Panasonic KX-E603 Fuse Replacement: passo 5, immagine 2 di 2

    • Flip the plastic lever on the right side of the roller wheel to disengage the paper lock.

    Traduci

  7. Panasonic KX-E603 Fuse Replacement: passo 6, immagine 1 di 3 Panasonic KX-E603 Fuse Replacement: passo 6, immagine 2 di 3 Panasonic KX-E603 Fuse Replacement: passo 6, immagine 3 di 3

    • Remove the roller wheel adjustment knobs by pulling firmly outward.

    • Both black knobs must be removed in this step.

    Traduci

  8. Panasonic KX-E603 Fuse Replacement: passo 7, immagine 1 di 2 Panasonic KX-E603 Fuse Replacement: passo 7, immagine 2 di 2

    • Unlock the roller wheel by simultaneously pressing down on the two spring levers on the left and right of the roller ends.

    Traduci

  9. Panasonic KX-E603 Fuse Replacement: passo 8, immagine 1 di 2 Panasonic KX-E603 Fuse Replacement: passo 8, immagine 2 di 2

    • While both spring levers are depressed, lift up with both hands to remove the roller wheel.

    Traduci

  10. Panasonic KX-E603 Fuse Replacement: passo 9, immagine 1 di 3 Panasonic KX-E603 Fuse Replacement: passo 9, immagine 2 di 3 Panasonic KX-E603 Fuse Replacement: passo 9, immagine 3 di 3

    • Flip the top down. Then, with both hands, lift straight up on the tan case to remove it from the chassis.

    Traduci

  11. Panasonic KX-E603 Fuse Replacement, Fuse: passo 10, immagine 1 di 1

    • The capacitors can be a shock hazard, avoid touching them.

    • The fuse can be found very close to two large, blue capacitors near the rear of the typewriter.

    Traduci

  12. Panasonic KX-E603 Fuse Replacement: passo 11, immagine 1 di 1

    • The fuse body is made from glass; be careful not to use too much force or it could break.

    • Firmly grasp the fuse between your fingers and pull upwards to remove it from its mount.

    • If the fuse is difficult to grasp with your hands, a spudger may be used instead.

    Traduci
Conclusione

To reassemble your device, use the new fuse and follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Lindsay Stratis

Membro da: 04/08/15

491 Reputazione

4 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

Cal Poly, Team 17-1, Forte Spring 2015 Membro di Cal Poly, Team 17-1, Forte Spring 2015

CPSU-FORTE-S15S17G1

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 462