Nikon Coolpix S9050 LCD Screen Replacement

Ultimo aggiornamento il December 16, 2016

10 minuti

Moderato

Inconveniente Markup

Necessarie Più Immagini

Introduzione Migliore

Guida Archiviata

Questa guida è mantenuta solo per scopi storici. Usa la versione aggiornata della guida per eseguire la riparazione.

Introduzione

The Coolpix S9050 was introduced in 2012 and discontinued in 2013

Ricambi

Strumenti

Mostra di più…

Use a blue pry tool and separate the black back plate from the camera.
Once the black plate is separated, carefully pull apart the back plate from the front half of the camera.
Make sure all four sides of the back casing are pried from the camera before completely pulling it apart. If not pulled off evenly plastic placement tabs may break.

Take the blue pry tool and lift the brown latch on the ZIF connecter that holds the screen tab in place.
Once the brown latch on the ZIF connecter is lifted upward, carefully lift the screen and pull away from the camera.
The screen and screen tab will detach from the motherboard.

Take the new screen and slide the tab in to the ZIF connector that the previous screen was plugged in to.
Close the brown latch on the ZIF connector and fit the screen in the original slot.
Return the dial flap to its original position.