Aggiusta la tua roba Comunità Store

Lenovo 100s Chromebook-11IBY Battery Replacement

Introduzione

This guide will show how to remove the battery for the Lenovo 100s Chromebook-11IBY. This removal will allow you to replace or upgrade the battery for your laptop.

Cosa ti serve

  1. Lenovo 100s Chromebook-11IBY Battery Replacement, Battery: passo 1, immagine 1 di 1

    • Ensure your device is turned off and unplugged.

    Traduci

  2. Lenovo 100s Chromebook-11IBY Battery Replacement: passo 2, immagine 1 di 1

    • Use a Phillips #0 screwdriver to remove the nine 6mm screws from the larger back plate.

    Traduci

  3. Lenovo 100s Chromebook-11IBY Battery Replacement: passo 3, immagine 1 di 2 Lenovo 100s Chromebook-11IBY Battery Replacement: passo 3, immagine 2 di 2

    • Turn your laptop back over, open it, and use the plastic opening tool on the recessed notch to gently pry each side and lift the keyboard plate up.

    • Be careful not to pull keyboard plate out immediately because cables are attached.

    Traduci

  5. Lenovo 100s Chromebook-11IBY Battery Replacement: passo 4, immagine 1 di 2 Lenovo 100s Chromebook-11IBY Battery Replacement: passo 4, immagine 2 di 2

    • Unlock the keyboard ZIF connector to release the keyboard flex cable.

    • To unlock a ZIF connector, use an opening tool or your fingernail to flip up the small, hinged locking flap.

    • Unlock the touchpad ZIF connector to release the touchpad flex cable.

    • Carefully pull both flex cables out of the ZIF connectors.

    • Remove the keyboard plate up and place it to the side.

    Traduci

  6. Lenovo 100s Chromebook-11IBY Battery Replacement: passo 5, immagine 1 di 1

    • Unplug the battery cable by pulling it towards the battery.

    • Pull parallel to the battery, not straight up.

    Traduci

  7. Lenovo 100s Chromebook-11IBY Battery Replacement: passo 6, immagine 1 di 1

    • Use the Phillips #0 screwdriver to remove the three 6mm screws from the battery.

    Traduci

  8. Lenovo 100s Chromebook-11IBY Battery Replacement: passo 7, immagine 1 di 1

    • Remove the battery.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Altre 2 persone hanno completato questa guida.

Autore

con 4 altri collaboratori

Milton Perez

Membro da: 03/09/17

630 Reputazione

5 Guide realizzate

Distintivi: 13

+10 altri distintivi

Team

USF Tampa, Team S7-G2, Cagle Spring 2017 Membro di USF Tampa, Team S7-G2, Cagle Spring 2017

USFT-CAGLE-S17S7G2

1 Membro

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 2,337