Salta al contenuto principale
Infant Optics DXR-8 Camera Disassembly

Infant Optics DXR-8 Camera Disassembly

Jonathon Dowell

Jonathon Dowell e 2 altri collaboratori

Ultimo aggiornamento il December 17, 2019

2 - 5 minuti
Facile
Introduzione Migliore
Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Introduzione

Vai al passo 1

Disassembling of the camera to allow access to the speaker, antenna, and power switch.

Cosa ti serve

Strumenti

  1. Infant Optics DXR-8 Camera Disassembly, Infant Optics DXR-8 Camera Disassembly: passo 1, immagine 1 di 2 Infant Optics DXR-8 Camera Disassembly, Infant Optics DXR-8 Camera Disassembly: passo 1, immagine 2 di 2
    • Position the camera with bottom facing toward you.

    • Using the plastic opening tool, remove all four rubber ends from the bottom of the camera.

  2. Infant Optics DXR-8 Camera Disassembly: passo 2, immagine 1 di 2 Infant Optics DXR-8 Camera Disassembly: passo 2, immagine 2 di 2
    • Remove the four 4 mm screws beneath rubber ends using the Phillips #00 screwdriver.

  3. Infant Optics DXR-8 Camera Disassembly: passo 3, immagine 1 di 1
    • Open the bottom of the camera to reveal the circuit board and speaker.

Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 3

Tutti i Tempi: 46