Introduzione

Over time dust and condensate may start to gather on the lens that is between the displayed image in the viewfinder and the eyepiece. To return the image in the viewfinder, this quick guide gives a method to clean the lens if dust gathers, and if water condensate gathers on the inner eyepiece lens.

Parti

Nessuna parte richiesta.

  1. Lift viewfinder to access battery pack.
    • Lift viewfinder to access battery pack.

    Aggiungi Commento

  2. Press the battery release button.
    • Press the battery release button.

    • While pushing the battery button, slide the battery to the left.

    Aggiungi Commento

    • Pull the battery pack out of the video camera.

    Aggiungi Commento

    • Pull the viewfinder eyepiece out and away from the main video camera until the black mark appears.

    Aggiungi Commento

    • Twist the eyepiece counterclockwise until it stops.

    Aggiungi Commento

    • Pull the eyepiece completely off away from the rest of the viewfinder.

    Aggiungi Commento

    • Using the Small Plastic Opening tool, pry the tab on the plastic lens away from the viewfinder.

    Aggiungi Commento

    • Use a cleaning cloth to wipe away residue from the viewfinder.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Kevin

Membro da: 24/01/2011

232 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 11-25, Maness Winter 2011 Membro di Cal Poly, Team 11-25, Maness Winter 2011

CPSU-MANESS-W11S11G25

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 13

Tutti i Tempi: 2,988