HP Pavilion x360 11m-ad013dx Keyboard Replacement

Ultimo aggiornamento il June 4, 2020

5 minuti

Facile

Introduzione

If the keyboard on your HP Pavilion x360 11m-ad013dx has stopped working or is in need of replacement, use this guide to replace the keyboard. For more information about malfunctioning keyboards, see our troubleshooting page: HP Pavilion x360 11m-ad013dx Troubleshooting. The keyboard panel contains the keys themselves, as well as the touchpad. The panel also provides access to the internal section of the laptop, containing the battery, hard drive, motherboard, etc.

Cosa ti serve

Strumenti

Mostra di più…

Passo 1 Keyboard

HP Pavilion x360 11m-ad013dx Keyboard Replacement, Keyboard: passo 1, immagine 1 di 1

Lay the HP Pavilion top-down with the front edge facing towards you.

Modifica

Passo 2

Remove the three 4.8mm Phillips #0 screws from the front side.

Modifica

Passo 3

Using a plastic spudger, remove the grey silicon strip closest to the back-side.

Modifica

Passo 4

Remove the three 5.7mm Phillips #1 screws.

Modifica

Passo 5

Open the HP Pavilion so that the screen is showing. Then tilt it down so that the screen is on its back, facing up.
Using a spudger, pry off the black keyboard panel.
This step requires force to unclasp the latches keeping the keyboard in place.

Modifica

Passo 6

Using your fingernail, disconnect the zero insertion force (ZIF) keyboard connector cable by flipping up the small locking flap.
You may disconnect the other end of the cable, for ease of access to other parts. Keep in mind that the end labeled MB connects to the motherboard.

Modifica