Disassembling Marshall MS-2 Partner Circuit Board
Cosa ti serve
Strumenti
-
-
First be sure to turn the power switch to the off position.
-
Do this by turning the leftmost knob counter-clockwise as until the line points to "off."
-
-
-
Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.
Preparati per le riparazioni future
Acquista tutti
To turn the device off, turn the rightmost knob counterclockwise, not the leftmost one (which controls the volume).
Célestin Taramarcaz - Replica