/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi
Unisciti alla più grande community di riparazione al mondo
Ricambi
GuideRisposte
Traduci
Dell Latitude X300 Cooling Fan Replacement

Dell Latitude X300 Cooling Fan Replacement

Taylor Bateman

Taylor Bateman e 9 altri collaboratori

Ultimo aggiornamento il February 11, 2025

30 - 40 minuti
Moderato
Necessarie Immagini Migliori
Studente al lavoro
Foto Azione
Inconveniente Markup
Necessarie Più Immagini
Introduzione Migliore

Introduzione

Vai al passo 1

If the cooling fan on your Dell Latitude X300 is damaged or no longer working, this set of instructions will aid you in replacing the cooling fan. The cooling fan is necessary for actively moving air through the inside of the laptop. If your Dell Latitude X300 is overheating or too noisy, your cooling fan may not be working properly. Before beginning ensure that the laptop is powered off.

Cosa ti serve

Strumenti

Mostra di più…

  1. Dell Latitude X300 Cooling Fan Replacement, Battery: passo 1, immagine 1 di 1

    • Before removing the battery from the laptop, make sure the power is off.

    • Push both battery locking clips outward at the same time.

    Traduci

  2. Dell Latitude X300 Cooling Fan Replacement: passo 2, immagine 1 di 1

    • Slide the battery out of the laptop.

    Traduci

  3. Dell Latitude X300 Cooling Fan Replacement, Keyboard: passo 3, immagine 1 di 1

    • Remove the four 4 mm Phillips #0 screws from the bottom of the laptop.

    Traduci

  4. Dell Latitude X300 Cooling Fan Replacement: passo 4, immagine 1 di 2 Dell Latitude X300 Cooling Fan Replacement: passo 4, immagine 2 di 2

    • Carefully turn the laptop over and open the screen all the way.

    • Locate the slot to remove the keyboard in the lower left hand corner.

    • Using a spudger as a lever, insert it into the slot and gently pry up.

    Traduci

  5. Dell Latitude X300 Cooling Fan Replacement: passo 5, immagine 1 di 1

    • After the keyboard pops up, pull it away from the screen just enough to release the tabs.

    • Don’t pull the keyboard out forcefully as there is still a ribbon attached to the laptop.

    Traduci

  6. Dell Latitude X300 Cooling Fan Replacement: passo 6, immagine 1 di 1

    • Unlock the ZIF connector on the computer by pushing the two outside tabs toward the screen.

    Traduci

  7. Dell Latitude X300 Cooling Fan Replacement: passo 7, immagine 1 di 1

    • Remove the flexible ribbon from the ZIF connector.

    • Do not pull on the ribbon to remove it from the ZIF connector.

    Traduci

  8. Dell Latitude X300 Cooling Fan Replacement, Palm Rest/Track Pad: passo 8, immagine 1 di 1

    • Position the laptop so that the bottom is facing upward.

    • Remove the three 4 mm Phillips #0 screws holding the bottom of the palm rest.

    Traduci

  9. Dell Latitude X300 Cooling Fan Replacement: passo 9, immagine 1 di 1

    • Return the laptop to proper position and open the screen.

    • Remove the six 4 mm Phillips #0 screws holding in the palm rest.

    Traduci

  10. Dell Latitude X300 Cooling Fan Replacement: passo 10, immagine 1 di 1

    • Gently lift the palm rest and rotate it outward so that the bottom is now facing up.

    • The ribbon attached to the track is short and extremely delicate. Use care when moving the palm rest.

    Traduci

  11. Dell Latitude X300 Cooling Fan Replacement: passo 11, immagine 1 di 1

    • Lift up on the small ZIF connector and remove the ribbon.

    • If the ribbon seems stuck, gently wiggle it to remove. Do not pull the ribbon with great force.

    Traduci

  12. Dell Latitude X300 Cooling Fan Replacement, Cooling Fan: passo 12, immagine 1 di 1

    • Remove the four 3 mm screws that hold the cooling fan to the system board.

    Traduci

  13. Dell Latitude X300 Cooling Fan Replacement: passo 13, immagine 1 di 1

    • Remove the tape holding the cooling fan wires down.

    Traduci

  14. Dell Latitude X300 Cooling Fan Replacement: passo 14, immagine 1 di 1

    • Unplug the cooling fan wires from the system board by gently pulling on the hard molded plastic portion.

    • Be careful not to damage the wires by tugging on them.

    Traduci

  15. Dell Latitude X300 Cooling Fan Replacement: passo 15, immagine 1 di 1

    • Lift the cooling fan out of the laptop.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 9 altri collaboratori

Taylor Bateman

Membro da: 01/20/12

93 Reputazione

2 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 11-20, Maness Winter 2012 Membro di Cal Poly, Team 11-20, Maness Winter 2012

CPSU-MANESS-W12S11G20

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 7

Tutti i Tempi: 1,437