/
Il mio banco da lavoro

Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Unisciti
Accedi
Unisciti alla più grande community di riparazione al mondo
Ricambi
GuideRisposte
Traduci
ASUS VG248 Disassembly

ASUS VG248 Disassembly

Sam Goldheart

Sam Goldheart e 3 altri collaboratori

Ultimo aggiornamento il August 30, 2021

5 - 15 minuti
Moderato

Introduzione

Vai al passo 1

Need to access the internals of your ASUS VG248? Here's a guide that shows how to remove the frame and open the display.

Cosa ti serve

Strumenti

Mostra di più…

  1. ASUS VG248 Disassembly, ASUS VG248 Disassembly: passo 1, immagine 1 di 2 ASUS VG248 Disassembly, ASUS VG248 Disassembly: passo 1, immagine 2 di 2

    • Before you begin, lay the monitor face down on a smooth, clean surface.

    • Four rubbery covers hide four screws in the rear of the monitor.

    • Pry out the plastic covers with a stiff pointed tool, like a metal spudger.

    Traduci

  2. ASUS VG248 Disassembly: passo 2, immagine 1 di 1

    • Remove the four 13.4 mm Philips #1 screws securing the monitor stand.

    Traduci

  3. ASUS VG248 Disassembly: passo 3, immagine 1 di 2 ASUS VG248 Disassembly: passo 3, immagine 2 di 2

    • Remove the stand from the display.

    Traduci

  4. ASUS VG248 Disassembly: passo 4, immagine 1 di 2 ASUS VG248 Disassembly: passo 4, immagine 2 di 2

    • The display bezel is held to the rear case by plastic clips that can be released by pulling straight up on the bezel.

    • Rather than use any prying tools that could damage the LCD, it's best to just pull with your fingers. A thin cloth will both protect your fingertips and prevent you from smudging the LCD.

    • Lay the cloth over one of the long edges of the display.

    • Grip the side of the bezel through the cloth and lift straight up. A few clips in the center will pop free.

    • Be careful to pull straight up, and not pry against the display. Pushing down on the display could damage it.

    Traduci

  5. ASUS VG248 Disassembly: passo 5, immagine 1 di 2 ASUS VG248 Disassembly: passo 5, immagine 2 di 2

    • Repeat the procedure around the display, lifting up the center of the next side.

    Traduci

  7. ASUS VG248 Disassembly: passo 6, immagine 1 di 2 ASUS VG248 Disassembly: passo 6, immagine 2 di 2

    • Move around to the other long side and lift up on the center of the bezel.

    Traduci

  8. ASUS VG248 Disassembly: passo 7, immagine 1 di 2 ASUS VG248 Disassembly: passo 7, immagine 2 di 2

    • Grip the center of the final side and lift the bezel away from the rear case.

    Traduci

  9. ASUS VG248 Disassembly: passo 8, immagine 1 di 2 ASUS VG248 Disassembly: passo 8, immagine 2 di 2

    • Now that you've freed the centers of the four sides, it's time to move on to the corners.

    • Each corner is secured by two large clips that can't be freed by just pulling straight up like you did with the sides.

    • In the next step, you'll be pushing in on the corner clip on the left of the bottom edge of the bezel.

    Traduci

  10. ASUS VG248 Disassembly: passo 9, immagine 1 di 2 ASUS VG248 Disassembly: passo 9, immagine 2 di 2
    Attrezzo utilizzato in questo passaggio:
    Jimmy
    $7.95
    Aggiungi al carrello

    • Using a thin stiff prying device, like a Jimmy, press in against the bottom clip in the lower left corner (beneath the HDMI logo).

    • While pressing the clip in, pull up on the lower edge of the bezel. The entire corner should pop free.

    Traduci

  11. ASUS VG248 Disassembly: passo 10, immagine 1 di 3 ASUS VG248 Disassembly: passo 10, immagine 2 di 3 ASUS VG248 Disassembly: passo 10, immagine 3 di 3

    • Once you've freed one corner, you should be able to gently twist the bezel off, freeing all of the remaining corners.

    • If any corners are particularly stubborn, repeat the previous step on the difficult corner.

    Traduci

  12. ASUS VG248 Disassembly: passo 11, immagine 1 di 1

    • Remove the bezel.

    Traduci

  13. ASUS VG248 Disassembly: passo 12, immagine 1 di 2 ASUS VG248 Disassembly: passo 12, immagine 2 di 2

    • Lift the LCD out of the rear case.

    • The row of adjustment buttons will come out of the case with the display, attached by a thin ribbon cable. Take care not to damage the cable.

    Traduci

  14. ASUS VG248 Disassembly: passo 13, immagine 1 di 1

    • With the casing removed, you now have access to the button board, cables, and the housing over the motherboard components.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 22 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Sam Goldheart

Membro da: 10/18/12

471.675 Reputazione

538 Guide realizzate

Distintivi: 48

+45 altri distintivi

Team

iFixit Membro di iFixit

Staff

119 Membri

19.521 Guide realizzate

10 Commenti

Do you know of any place that sell the replacement lcd screen?

treymcbrd - Replica

Hi there, I have a little thunderbug trapped in the LCD is it possible to take the metal casing at the front of to reomve said bug? Thanks

TJ Grainger - Replica

You could yes, but be very careful NOT to introduce dust into the panel!

Bertus van den Dikkenberg -

Hi. A really small bug got stuck within my screen and I accidentally squished it so now it’s dead in there and I want to clean it. How would I remove the top layer of the screen? Because from what I can see it seems like it got squished between the glass and the actual LCD screen itself.

Carl Viernes - Replica

Guide to disassemble vg259qm

syedaliabdullah272 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 26

Ultimi 7 Giorni: 189

Ultimi 30 Giorni: 720

Tutti i Tempi: 125,431