Miadore Classic N64 Controller Repair

The Miadore Classic N64 Controller was released in 2021. It is a third-party controller that was produced in order to replicate the original N64 Controller so that people could play N64 games. It takes after the signature three-pronged shape, analog stick, and C buttons. The device is compatible with the original N64 console, but some models may work with modern devices or emulators that support N64 games since it uses a USB.

In general, the controller is similar to the original N64 controller, which is about 6 inches (15.24 cm) long, 6.3 inches (16 cm) wide, and around 2.2 inches (5.6 cm) in depth at its highest point. The controller typically weighs around 8 to 10 ounces, though it can vary due to materials used since it is a third-party controller.

There have not been any widely reported recalls on the Miadore Classic N64 Controller. However, being a third-party product, the quality can vary from source to source. Keep in mind that the analog stick tends to wear down over time when it is used a lot. Some third-party sources provide extra analog sticks to replace an unusable analog stick. Make sure to check reviews on the device when purchasing the product to see if it is a reliable source to get the controller. The popularity of retro gaming has increased interest in third-party controllers as an affordable alternative retro controller.

The Miadore Classic N64 Controller has a vibrant transparent casing to it, in a variety of colors. The action buttons on the right are yellow, the d-pad on the left is grey, the B button is green, and the A button is blue. As well, the start button in the middle is red. Model Number: X003BN1B93

Features & Specs

Connectivity Technology: USB

USB Cable Length: 6 feet

Button Quantity: 10

Controller Type: Joystick

Measurements

Item Dimensions: 6.3 x 5.9 x 2.2 inches

Compatibility

Compatible with 32-bit and 64-bit computers

Compatible with Win98/ME/2000/2003/XP/Vista/7/8/8.1/10, Mac OS X and beyond

Work for Raspberry Pi, Raspberry Pi 2, Raspberry Pi 3, Raspberry Pi 3 B+ running Retropie, Recalbox, Retroarch

Although plug and play, don't forget to download a game emulator to use it, and remember to configure/map the controller inputs in the program you use to run your games.

Currently Supported Game Emulators: Project64, 1964, MAME (MESS), Mupen64Plus, Sixtyforce, CEN64; Historical: Project Unreality, Corn, UltraHLE, Nemu64

Does NOT support the android TV box, C64(Commodore 64), Google Chromebook, Amazon Fire TV. Does Not support ONLINE games as well.

Miadore Classic N64 Controller Amazon Page

Miadore Amazon Storefront Page

Classic USB Controller for N64 Gaming

Review on Youtube