Join the Repair Community - Create Account

Parts

Zeki TBQG884B Rear Case Replacement

Zeki TBQG884B Rear Case Replacement

David Wyman and 14 other contributors

Last updated on Jan 4, 2024

10 - 15 minutes

Moderate

Introduction

This guide will assist you in replacing the rear cover of your Zeki TBQG884B tablet, or as a prerequisite for repairs on any of the device's other internal components. It is important to remember before beginning this guide that the device is extremely delicate and to complete each step of this guide very carefully.

What you need

Tools

Show more…

Step 1 Rear Case

Zeki TBQG884B Rear Case Replacement, Rear Case: step 1, image 1 of 2

Zeki TBQG884B Rear Case Replacement, Rear Case: step 1, image 2 of 2

Remove the two screws from the end of the device where the ports are located using a Phillips #1 screwdriver.

Step 2

Zeki TBQG884B Rear Case Replacement: step 2, image 1 of 1

Place the tablet down so that the screen is facing away from you.
Insert the tip of your opening tool into the small gap between the gray and white plastic covering. Pry it open and you should hear the clips opening up.
Gently work your way around the perimeter of the tablet's edge.

Step 3

Zeki TBQG884B Rear Case Replacement: step 3, image 1 of 2

Zeki TBQG884B Rear Case Replacement: step 3, image 2 of 2

Remove the back cover
Remove any tape on the speaker and detach the speaker from the back plate.
The speaker is connected to the motherboard by two soldered wires. Don't break them when you remove the speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gear Up For Future Repairs

Author

with 14 other contributors

David Wyman

Member since: 09/16/15

346 Reputation

3 Guides authored

+10 more badges

Team

IUPUI, Team 1-3, Harley Fall 2015 Member of IUPUI, Team 1-3, Harley Fall 2015

IUPUI-HARLEY-F15S1G3

5 Members

5 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 23

All Time: 434