RIDGID R2740 Ball Bearing Replacement
Introduction
Go to step 1If your RIDGID Belt Sander R2740 is making abnormal sounds the cause could be from a worn or damaged ball bearing. This guide will teach you how to replace the ball bearing. For this guide, you will need a screwdriver with a T20 head and a hammer.
What you need
Parts
Tools
Show more…
-
-
Orient the belt sander so that the AirGuard Technology logo is facing you.
-
Remove the nine 19mm, two 51mm and one 32 mm screws that hold the cover into place.
-
Remove the cover from the belt sander.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Gear Up For Future Repairs
Shop all
Team
Oregon Institute of Technology, Team S1-G1, Lancaster Winter 2019 Member of Oregon Institute of Technology, Team S1-G1, Lancaster Winter 2019
OIT-LANCASTER-W19S1G1
4 Members
6 Guides authored
