Salta al contenuto principale

Cosa ti serve

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Huawei P20 Pro, usa il nostro manuale di assistenza.

  1. Smontaggio Huawei P20 Pro, Smontaggio Huawei P20 Pro: passo 1, immagine 1 di 3 Smontaggio Huawei P20 Pro, Smontaggio Huawei P20 Pro: passo 1, immagine 2 di 3 Smontaggio Huawei P20 Pro, Smontaggio Huawei P20 Pro: passo 1, immagine 3 di 3
    • L'inverno La primavera sta arrivando e con questa la nuova ammiraglia di Huawei. Diamo una rapida occhiata alle sue sfolgoranti specifiche:

    • Schermo touchscreen Oled da 6,1" con risoluzione 2240 × 1080 e proporzione 18,7:9

    • Processore octacor Kirin 970 con GPU Mali-G72 MP12 e NPU dedicata

    • Tripla fotocamera 40 MP + 8 MP + 20 MP, con le unità principali ƒ/1.6 e ƒ/2.4 firmate Leica.

    • Fotocamera da selfie ƒ/2.0 da 24 megapixel (no, non è un refuso)

    • 128 GB di memorizzazione e 6 GB di RAM

  2. Smontaggio Huawei P20 Pro: passo 2, immagine 1 di 2 Smontaggio Huawei P20 Pro: passo 2, immagine 2 di 2
    • Diversamente da Samsung, Huawei ha deciso di mettere un notch (la rientranza nel bordo superiore) nel suo display attorno alla fotocamera e all'altoparlante voce.

    • Detto ciò, il P20 Pro sembra abbastanza tiepido sul fronte notch: l'EMUI offre all'utente l'opzione di "nascondere" il notch.

    • Il notch non è l'unica cosa che Huawei ha preso in prestito da Apple: ha anche una collinetta con due fotocamere che sporge di 1,4 mm in stile iPhone X e un più modesto "bottone" stile iPhone 6 per il sensore monocromatico.

  3. Smontaggio Huawei P20 Pro: passo 3, immagine 1 di 3 Smontaggio Huawei P20 Pro: passo 3, immagine 2 di 3 Smontaggio Huawei P20 Pro: passo 3, immagine 3 di 3
    • Messo a confronto (sotto) il P10, questo nuovo Huawei appare un po' cresciuto nelle dimensioni: 155 × 73,9 × 7,8 mm e 180 g di peso.

    • Se lo giriamo sul dorso, assistiamo a un'evoluzione in atto. Due fotocamere: negativo; tre fotocamere: positivo!

    • Le fotocamere da 40 MP e 8 MP lavorano insieme per offrire uno zoom ottico 3X. La fotocamera monocromatica da 20 MP garantisce un maggior dettaglio e una nitidezza superiore.

    • Dato che le fotocamere "extra" del P20 Pro sono sul dorso e non serve l'hardware Face Id, il notch occupa un po' meno spazio dell'iPhone X che lo ha preceduto (a destra).

    • A parte le dimensioni, va considerato l'interessante fattore geometrico dei notch.

  4. Smontaggio Huawei P20 Pro: passo 4, immagine 1 di 3 Smontaggio Huawei P20 Pro: passo 4, immagine 2 di 3 Smontaggio Huawei P20 Pro: passo 4, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    iSclack
    $24.99
    Compra
    • Ma abbiamo detto abbastanza sugli esterni; nella terra degli smontaggi quello che conta è ciò che sta dentro.

    • L'eliminazione delle antipatiche pentalobe è la benvenuta, ma è giusto togliere tutte le viti? È ora di tentare la fortuna con il nostro fidato iSclack.

    • Con nostra sorpresa, il P20 Pro si apre quasi con la stessa facilità di un fiore nel sole di primavera. Quasi. Non abbiamo mai dovuto usare un plettro di apertura con un fiore...

    • Questo smontaggio sta veramente iniziando a fiorire, guarda quanto nettare tecnologico... ma stiamo forse perdendo il controllo delle metafore?

  5. Smontaggio Huawei P20 Pro: passo 5, immagine 1 di 3 Smontaggio Huawei P20 Pro: passo 5, immagine 2 di 3 Smontaggio Huawei P20 Pro: passo 5, immagine 3 di 3
    • Proviamo a rimuovere la cover posteriore e ci restiamo male! Qui non c'è nessuno scanner di impronte digitali e c'è ancora un cavo pronto a strapparsi nel corso dell'apertura.

    • Sembra che Huawei abbia deciso di montare il sensore dell'autofocus laser sul case posteriore per metterlo al di sopra delle fotocamere.

    • Mettiamo finalmente le mani su alcune viti e abbiamo facilmente ragione dell'antenna NFC e della schermatura della scheda madre.

    • Questa è un'antenna NFC e non una bobina di ricarica wireless: questo retro in vetro frantumabile è lì solo per fare spettacolo e per rompersi...

    Do you know why is the laser autofocus sensor on the rear case and need to cover the cameras?

    Is the sensor’s view angle that trade off with ID opening?

    Alex - Replica

    Und wenn das abgerissen ist ? Was ist das genau ?

    susann.friederich - Replica

    Hallo Susann, bei dem Kabel handelt es sich um das Kabel für den Laser Autofokus für die Kamera. Wenn das Kabel gerissen ist, kann es sein, dass dein Handy in bestimmten Situationen nicht mehr richtig fokussiert oder du im schlechtesten Fall keine oder keine scharfen Fotos mehr damit schießen kannst.

    Dominik Schnabelrauch -

    Is the back cover part of the antenna for receiving and transmitting the signal to the cell tower? I got my phone back after replacing the back cover and screen, but now it has very poor cell signal reception. What could be the problem?

    Валерий Юруть - Replica

  6. Smontaggio Huawei P20 Pro: passo 6, immagine 1 di 2 Smontaggio Huawei P20 Pro: passo 6, immagine 2 di 2
    • Alla fine, arriviamo al cervello delle operazioni—la scheda madre—e lo districhiamo dai vari connettori.

    • Ancora una volta Huawei rimane fedele al suo solito schema della scheda madre, scegliendo una batteria più larga e una scheda più piccola rispetto ad alcuni altri telefoni Android.

    • Il trio di fotocamere viaggia insieme alla scheda madre, tirandosi dietro il modulo del flash posteriore.

    • Con tutte queste opzioni, di che cosa ci occupiamo per prima cosa: delle fotocamere o della scheda madre? Optiamo per i guardoni e portiamo con noi la fotocamera anteriore.

  7. Smontaggio Huawei P20 Pro: passo 7, immagine 1 di 3 Smontaggio Huawei P20 Pro: passo 7, immagine 2 di 3 Smontaggio Huawei P20 Pro: passo 7, immagine 3 di 3
    • Le tre fotocamere posteriori sono collegate con due soli connettori: la fotocamera principale e quella monocromatica condividono una porta, mentre la fotocamera a teleobiettivo ne ha una tutta per sé.

    • Nella vista laterale, possiamo confrontare le rispettive sporgenze:

    • SInistra: 20 MP (monocromatica ƒ/1.6). Centro: 40 MP (principale ƒ/1.8). Destra: 8 MP (teleobiettivo ƒ/2.4)

    • Alla fine, possiamo allineare e ispezionare quattro occhi, compresa la fotocamera da selfie del P20 Pro da soli 24 MP.

    • La permanenza di Samsung in testa alla classifica delle fotocamere per smartphone è durata meno di un mese. Incredibilmente il Pixel 2 sta ancora tenendo botta nella top 5 pur avendo una singola fotocamera principale.

    错别字,“难以执行的是 ” 应为“难以置信的是”。

    liuzheng - Replica

    谢谢指正,已经修改了!下次可以直接点翻译修改过来,这样更快!:)

    Yuting Zhao -

    有几处笔误:引号引错,三星仅在智能手机相机排行榜【榜首】呆/待了不到一个月。

    另外翻译腔很有趣……

    Arcno - Replica

    谢谢指正,已经修订。期待看到你的翻译!

    Yuting Zhao -

    Do you know manufacture of the sensors?

    Miroslav Růžička - Replica

    All this, and you didn’t ID the source of the sensors?

    dave - Replica

    Do you know the height of each camera module?

    Gershwin - Replica

    How to remove the front camera? The module wobbles, but does not come out of the frame. I would hate to tear off the cable.

    Thorsten - Replica

    • Se il P20 Pro non ha una sofisticata doppia apertura, può mettere a fuoco tramite laser. E mettere a fuoco con profondità di campo. E mettere a fuoco tramite fase. E mettere a fuoco tramite contrasto. Di fatto fa molte cose con la messa a fuoco rapida.

    • Ufficialmente, solo la piccola fotocamera a teleobiettivo da 8 MP dispone di hardware OIS (Stabilizzazione Ottica Immagine). Le altre, dice Huawei, si affidano alla Neural Processing Unit di Kirin per cose come la messa a fuoco predittiva, le impostazioni per 19 tipi di scena differenti e gli effetti di filtraggio come il bokeh.

    • Detto ciò, questo ci sembra certamente dell'hardware OIS: tre hardware OIS per essere esatti. Vuoi tenerci all'oscuro, Huawei?

    • La fotocamera RGB primaria usa un sensore da 1/1,7 pollici (per confronto: iPhone X 1/2,9 pollici, Samsung Galaxy S9+ 1/2,55 pollici) e vanta un massimo valore ISO di 102.400, adatto per riprendere skyline notturni e party.

    Actually in this video you can see that the lens move, but I miss a camera dissection or x-ray view to see if actually there are magnets and coils that could support OIS on the ‘disabled’ lens.

    karmansan - Replica

    Surprise update: see next step …

    Tobias Isakeit -

  8. Smontaggio Huawei P20 Pro: passo 9, immagine 1 di 3 Smontaggio Huawei P20 Pro: passo 9, immagine 2 di 3 Smontaggio Huawei P20 Pro: passo 9, immagine 3 di 3
    • Tutti attenti! Siamo curiosi quanto voi quindi ecco i trigemini interamente sezionati. Non puoi pretendere di più con quello che paghi per vedere lo smontaggio... no, aspetta, è tutto gratis!

    • E già che ci siamo, diamo un occhio ai sensori.

    • In mezzo c'è il sensore di colore RGB da 1/1,7 pollici, con il sensore monocromatico da 1/2,7 accomodato alla sua sinistra. Sulla destra vediamo il teleobiettivo con sensore da 1/4 di pollice.

    OK who broken the two sensors in the middle image ;-}

    Dan - Replica

    Guilty, although the sensors are “fine”. Just the glass on top of the sensors broke (there is small gap between the sensors and the glass).

    Tobias Isakeit -

    Those coils on the sides of the modules on the left are for autofocus, hence only 2 per lens assy. The coils for OIS are mounted on the bottom of the telephoto module (as you can see on the green PCB). The lenses wobble a bit because they need to be free to go back and forth to focus. There are designs that put the OIS coils on the sides, but it’s not the case in here, you need 2 for the y axis and 2 for the x axis. Those modules on the left only have VCM’s for the z axis.

    Now every single news company is putting out articles saying that the P20 Pro has OIS in all cameras.

    Mike - Replica

    could you share back side pic of the silver holder which in pic1?

    Brian - Replica

  9. Smontaggio Huawei P20 Pro: passo 10, immagine 1 di 2 Smontaggio Huawei P20 Pro: passo 10, immagine 2 di 2

    Hi, did you find out which audio amps are used in this model? Thanks.

    Cltest Edin - Replica

  10. Smontaggio Huawei P20 Pro: passo 11, immagine 1 di 2 Smontaggio Huawei P20 Pro: passo 11, immagine 2 di 2

    Not highlighted is the GNSS Location Hub BCM4774IUB2G above and to the left of the BCM43596 (green). This means that provided the software/ firmware is amenable, this phone should make use of signals from the Galileo satellites (https://www.broadcom.com/products/wirele... ). This is something that different websites and Huawei itself have been inconsistent in reporting.

    mkstowegnv - Replica

  11. Smontaggio Huawei P20 Pro: passo 12, immagine 1 di 3 Smontaggio Huawei P20 Pro: passo 12, immagine 2 di 3 Smontaggio Huawei P20 Pro: passo 12, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    iFixit Adhesive Remover
    $19.99
    Compra
    • Di solito non ci piacciono le barriere che si frappongono tra noi e le sostituzioni della batteria, ma potremmo fare un'eccezione per questa porta di ricarica modulare. Ecco una sostituzione facile da eseguire!

    • Dato che siamo arrivati fin qui senza applicare calore, attacchiamo freddamente la colla della batteria con alcune gocce di una pozione magica. Ancora un attimo e passiamo al plettro di apertura.

    • Tra le categorie di batterie per smartphone, questa è un peso massimo: 4.000 mAh per 3,82 V, ovvero 15,28 Wh.

    • Questo valore batte quello del Samsung Galaxy S9+ (13,48 Wh) e stacca nettamente l'iPhone X (10,35 Wh), mentre equivale a quello del suo congiunto, il Mate 10 Pro. Per essere corretti, però, ricordiamo che il software ha un notevole effetto sull'efficienza energetica.

    The battery sparked as I was slowly prying it out like a child. Instant heat ? obviously not ok to use anymore…. What will likely happen if I try. Also what exactly happened. Its sitting in the corner now likely hotter than the sun by now

    Zachary Yankewicz - Replica

    Is it going to blow up?

    Zachary Yankewicz - Replica

    What is the white cable popping up in the picture? I have slightly damaged it while opening the lid... any help, where to buy a replacement?

    Anyway after closing the lid back, the NFC is not working anymore... what could I have done wrong? is the white cable in the pic related to the NFC antenna?

    Giovanni Cotella - Replica

  12. Smontaggio Huawei P20 Pro: passo 13, immagine 1 di 3 Smontaggio Huawei P20 Pro: passo 13, immagine 2 di 3 Smontaggio Huawei P20 Pro: passo 13, immagine 3 di 3
    • Rivolgiamo la nostra attenzione al fondo della telaio e troviamo una piccola scheda figlia, che si nasconde tra un altoparlante e il motore di vibrazione.

    • Rispetto a quanto affrontato nell'estrazione della batteria, aver ragione della colla che fissa questa collezione di parti è un gioco da ragazzi, anche se è un gioco appiccicoso.

    • Ma dov'è il jack cuffie!?

    • Solo il P20 Lite è dotato di una porta ausiliaria, ma sembra che il p20 normale e il Pro siano un po' più "coraggiosi".

    • È una buona cosa che la porta di ricarica sia modulare, perché si sobbarca un doppio lavoro tra cuffie e cavi di ricarica!

    Vanilla P20 has no headphone jack like the P20 Pro.

    Enrique Villacrez T - Replica

    You’re right, only the P20 Lite does have one. It’s been corrected.

    Tobias Isakeit -

    扬声器有细节图吗?哪家供应商

    mr chen - Replica

  13. Smontaggio Huawei P20 Pro: passo 14, immagine 1 di 3 Smontaggio Huawei P20 Pro: passo 14, immagine 2 di 3 Smontaggio Huawei P20 Pro: passo 14, immagine 3 di 3
    • Ultima canzone, ultimo ballo per la coppia iOpener/plettro, su questo motivo: rimozione del display!

    • Trattiamo il gruppo display come una banana, che... splittiamo.

    • Il display si stacca dal corpo del telefono, ma solo dopo che il cavo del display affronta un viaggio irto di pericoli attraverso un foro nel telaio centrale.

    • Fortunatamente questa riparazione va eseguita solo in presenza di uno schermo rotto; sfortunatamente questa comune riparazione richiede di passare attraverso una cover di vetro ben incollato e la batteria.

    Would you update the width of Display’s adhesive on the long side? Is it a narrow boarder design but without glue?

    Alex - Replica

  14. Smontaggio Huawei P20 Pro: passo 15, immagine 1 di 3 Smontaggio Huawei P20 Pro: passo 15, immagine 2 di 3 Smontaggio Huawei P20 Pro: passo 15, immagine 3 di 3
    • Una volta separato il display, non rimane molto all'interno. Una cosa, però, resta.

    • Facendo leva con delicatezza, il pulsante home è liberato!

    • In assenza di hardware Face ID o di scansione dell'iride, questo telefono usa ancora l' "arcaico" pulsante fisico. Non ci sono notizie sul fatto se sia o no legato indissolubilmente alla sua scheda madre.

    • Un cambiamento inaspettato: i sensori di prossimità e di luminosità sono sepolti sotto il display nel telaio centrale. Un finale piuttosto sconfortante per il nostro smontaggio.

    The one I bought has face ID, the on/off is below the volume, as the fingerprint reader occupies that space.

    lula - Replica

  15. Smontaggio Huawei P20 Pro: passo 16, immagine 1 di 1
    • È ora di passare ad altro! Date un'ultima occhiata all'interno del telefono Huawei a tre occhi in vista di nuovi avvincenti smontaggi da parte di iFixit!

    • Vuoi vedere l'interno del tuo P20 Pro senza aprirlo? Ecco uno sfondo a strati sovrapposti da caricare sul tuo telefono !

    • Vuoi essere il primo a scoprire le ultimissime sugli smontaggi? Iscriviti al nostro elenco stampa per avere gli scoop di prima mano!

    Sensore home si smonta in due pezzi?

    lulu_giuliano - Replica

    There is no information about the 4G antenna location.

    Stig F - Replica

  16. Considerazioni Finali
    • Molti componenti sono modulari e possono essere sostituiti in modo indipendente tra loro.
    • Sostituire la batteria è possibile ma richiede tempo e lavoro.
    • I pannelli anteriore e posteriore sono entrambi in vetro e questo raddoppia il rischio di rottura.
    • La sostituzione dello schermo richiede di passare attraverso almeno due strati di adesivo e alcune operazioni di smontaggio.
    Punteggio Riparabilità
    4
    Riparabilità 4 su 10
    (10 è il più facile da riparare)

Un ringraziamento speciale a questi traduttori:

en it

76%

Questi traduttori ci stanno aiutando ad aggiustare il mondo! Vuoi partecipare?
Inizia a tradurre ›

Tobias Isakeit

Membro da: 03/31/14

117.802 Reputazione

188 Guide realizzate

Team

47 Commenti

we should always cultivate habit of repairing the broken gadgets and reuse them. else e waste is going to grow like !&&* and kill us. Thanks I fix for your job

Shashidhar AM - Replica

the best teardown site. I wish you start franchisee in India too.

www.drtechnno.com

Painreliever - Replica

Why only a 4 out of 10? This is like the only flagship that doesn't require heat to get into, and you say in the article that everything is modular…

Stefan A - Replica

I would give only 1 point to every flagship phones which back hold by double sided adhesive tape, these phones are fuckingly expensive and the only thing holds it together is cheap tape, if i pay the price of an used car for a phone then i want screws, not double addhesive tape.

kirchner david -

Please do a Huawei P20 Lite Teardown

;0

Humam Tarabishi - Replica

I have a P20 Pro and had a stuck SIM card inside. They said I needed to replace the motherboard and charging me $500 for the replacement! Isn’t that too much?

James - Replica

Well, all of the engineer in the repair store which are ran by HUAWEI don’t have the permissions to use the hot-wind gun to heat your motherboard to get the broken SIM card reader out and replace the new one. When they know your motherboard has something wrong, they just want to replace the broken thing. And they think your motherboard is broken, then they want to replace is. But I think they can also get your motherboard out of your phone, use the tweezers to get the Sim card out and bring it back. Maybe it would failed but it is a choice. If they successed to get it out, maybe you just need to give them USD20 (20 UNITED STATS DOLLARS) for that.

Dill Zhu -

I broke the back cover. Found it for 50$ on ebay. Do you think I could replace it myself?

Billy joseph - Replica

Hi Billy,

the back cover of the Huawei P20 Pro is relatively easy to remove. Take care to get good adhesive for the reassembly with the new back cover. Nevertheless it’s unlikely to achieve the same water resistance after the reassembly as before.

Dominik Schnabelrauch -

The P line is their photography geared line. The flagship is the still the Mate line.

ranron - Replica

How difficult is it to access the internal storage and transfer it? I have a smashed screen and back but i hear it receiving messages etc. (p20pro)

Mark Chilvers - Replica

My back glass broke today and I found replacement for £15 but no camera lens how difficult is to replace a remove lens from one cover to put on another

Peter - Replica

Hi. My finger scanner got broken. Is it possible to just replace it without replacing the whole screen?

Alexey Belorusov - Replica

It is possible to replace the fingerprint sensor / home button. But to do so you have to remove the display unfortunately. You won’t be able to access the home button through the mid frame.

Tobias Isakeit -

Fingerprint sensor IS REPLACEABLE withohut screen removal, only very difficult and fiddly. I’ve done it in december 2020.

Milan Jovanović -

Wow I didn't expect to read such a bad article today. After just having read the iPhone Xs’s teardown and seeing it's got a 6 for basically being irrepairable, its just weird to see this quite repairable phone get a four out of ten.

SHAME on you

gb25 - Replica

The XS is quite repairable apart from the glass back, which even if broken is primarily a cosmetic issue. (We still docked it a point though—if not for the glass back, it would score a 7.) The truly critical stuff like screen and battery replacements are pretty easy on all modern iPhones. The P20 Pro is more difficult to work with and relies way too heavily on glue—and that display replacement is very poorly prioritized. A score of 4 is pretty fair, on par with the current Galaxy line.

Jeff Suovanen -

P20 teardown..please.

Donald - Replica

I had the subboard of my p20pro replaced. With all the adhesives being removed and replaced as well, would it still hold on the being ip67? Huawei service center near me did the work.

John Darwin Timoteo - Replica

Which is GPS module ? Why you don’t say anything about it. For some people it is the most important part of the phone.

Alex Z - Replica

For me too! =)

ahmet kara -

which module could support type-c water detection?

loven chen - Replica

Can you just replace the screen and not the lcd?

my screen is little bit broken but the touch screen works fine.

Rasmus Pold - Replica

No, the display is a fused unit. Replacing only the glass would require special tools and machines.

Tobias Isakeit -

Wow that was great! Where is the microphone? My microphone doesn't work properly so I hope I can change it myself!

Ohqm - Replica

i poked my microphone is it okay to poked and not lose the waterpfoof of it?

abbyoutiful - Replica

Where is the glue? I mean where the glue/adhesive tape hold the display? Thanks. If you can send me Photo with Red Line where is glue.

Bartosz Lange - Replica

Can you guys please post an x-ray pic of the phone like you did for the iPhone X? It's my current daily driver and it'd be cool if I could get that as my wallpaper

Nocifer - Replica

I am sorry Nocifer but the phone was torn down in Germany where we don’t have a partner for X-Ray imagery yet. If someone has such a machine at his/her disposal feel free to contact us. For the the time being I can offer this layered image of the inside as a wallpaper

Tobias Isakeit -

Does anyone know who makes the three different sensors in the P20 Pro? I hear that Sony makes the main sensor, but I would also like to know about the monochrome and telephoto sensor. Thank you!

John Miller - Replica

Buonasera volevo Porre un quesito Ho appena comprato un p30 pro Huawei dovendo inserire la SIM card ho sbagliato foro sul fondo Praticamente ho messo la graffetta nel piccolo foro che da quanto ho capito dovrebbe essere l'abbattitore di rumori esterni. Naturalmente ho fatto una piccolissima pressione Mi sembra di ricordare di aver trovato una barriera rigida secondo voi è possibile che possa aver bucato qualche membrana oppure sono andato a parare contro un telaio rigido? Grazie in anticipo

Paolo Folchitto - Replica

No worries. You did not damage anything since the mic is installed at an angle (see step 9 in the P30 Pro Teardown). Everything should still work fine.

Tobias Isakeit -

Ciao mi può dire tasto home che fa anche di impronta si smonta in due pezzi?

lulu_giuliano - Replica

Ou est le micro de réduction de bruit svp ?

Jeremy LEMOINE - Replica

In fact I inserted the Sim tool in the mic for noise cancelation on the top of the phone. Is there any damage possible like breaking a membrane ? Thanks

Jeremy LEMOINE - Replica

Hi Jeremy,

because of the build of the phone it is nearly impossible to break the microphone or it’s gasket that way and your phone should be fine. In case you’re more interested into the build of the phone, I answered a similar question regarding puncturing a microphone hole in the frame here: I inserted the pin in the left bottom microphone. The question was for the Huawei Mate 20 Pro but the mic build is more or less the same just in another location.

Dominik Schnabelrauch -

Bonjour

Pour le remontage de la coque arrière, comment faut il procéder ? Ya til une colle à prévoir ou est elle sur la coque prête à être récoler

Merci

thierryberck - Replica

Bonjour @thierryberck

Pour cela, enlevez les résidus d’adhésif et appliquez-en une nouvelle couche avant de remonter la coque.

Claire Miesch -

davvero fantastico, il miglior sito di dis-assemblaggio che abbia trovato ad ora, complimenti! Soprattutto il modo ironico di condurre l’indagine ma anche la notevole qualità delle immagini fornite a corredo

Marco baudo - Replica

Can anybody give me a url to show how to replace and install both the volume up and down button flex combined with the Side Key Frame. I cannot find anyone who has done a tear down video with these included. At the moment I’m having a really hard time installing these into a new frame which does not have the assembly. Can anyone help please? Thanks

John - Replica

Nice teardown, but the score is wrong. Repairability of this phone is at least 6. I’ve repaired several already. Everything is modular and replaceable. Battery is not difficult to replace, where did you get that it is? You could lower the score by one for how expensive original display is, ind how there are no decent replacement screens, only trash, but the every Samsung should get same -1 for this reason.

Fingerprint sensor IS REPLACEABLE withohut screen removal, only very difficult and fiddly. I’ve done it in december 2020.

Milan Jovanović - Replica

hola saludos como conseguir un esquematico del huawei P20 pro

Rene Figueroa - Replica

network signal bad

m27amed - Replica

Could you get me the infrared sensor of the camera?

Hugo Hernandez - Replica

What is the white wire that connects to the pins marked as "B"?

jon.atkinson - Replica

Do you know if we can access internal storage and transfer it? Phone is dead but need the data :( any help is appreciated. Thanks

iam wind - Replica

Is the back cover part of the antenna for receiving and transmitting the signal to the cell tower? I got my phone back after replacing the back cover and screen, but now it has very poor cell signal reception. What could be the problem?

Валерий Юруть - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 9

Ultimi 7 Giorni: 76

Ultimi 30 Giorni: 646

Tutti i Tempi: 211,419