Lid switch board has broken reed switch
After all of the helpful info on this site I downloaded the service manual, printed it up and worked through all the steps. Got weird values when testing per the manual but didn't get error indicator on control board so I dug a little deeper into the ridiculous latch/switch. I knew there is a magnet on the lid so there had to be a reed switch, using a magnifier I found it and saw it was cracked. It's tiny. Not sure if it's NO or NC or if there are polarity considerations etc... so I'll probably just buy a new switch. But if anyone has any experience replacing the reed switch I'd love to hear it.
Thanks to all who contribute here!
Questa è una buona domanda?