Using the ifixit steps I replaced the battery and when the battery was fully charged I couldn’t get it to boot up so I could drain the battery. I went through the steps 2 more times to make sure that all connections were solid and still couldn’t get the computer to boot up.
Questa è una buona domanda?
Rep: 481k
35
330
971
Double check your keyboard cable connection. Is the ribbon cable fully seated and squarely in? Did you properly flip the latch up to open and then close it to compress the cable? In the process of taking out the old battery did you nick the keyboard cable?
If your sure see if you can get the system to startup by using the Power Pads. Quickly short across the two square pads I’ve marked up here
Questa risposta è stata utile?
The keyboard cable is secure and trying the power pads did nothing.
Is there a way to include pictures? I thought that might help.
@j316 - Sure you can post images & short vids here's how Aggiungere immagini ad una domanda You can't do it in comments only in your Question or a new Answer.
Well this is not good :-{ If the Power Pads didn't start it then we have something deeper. It's not your battery
Ultime 24 Ore: 1
Ultimi 7 Giorni: 5
Ultimi 30 Giorni: 6
Tutti i Tempi: 69
What is the color of the MagSafe charger LED? Amber or Green or not lit.
da Dan
It was Amber, then green when it fully charged after a few hours
da Jeanice Pratt