Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione


Repair guides and support for Panasonic's Viera line of televisions.

358 Domande Visualizza tutte

Panasonic TV frozen at first instulation language screen, TV Blind!

I have a Panasonic 55” with a Vestel 17MB130s board, the firmware was from a different setup as it went dead before and I used a setup from friend to re-boot it.

I was changing things in Vestel toolbox and got back my FreeviewPlay and the recording options witch were not on the new setup I instaled, then I tried to change the remote control code in hardware.bin profile and I did it wrong.

Now I have a TV that cant see any remote control not even universal and the bottons on the tv don’t work either?

So basicly it’s frozen at the first screen you get when you turn on a new TV, the language screen, I have tried a mouse, keyboard, virtual remolt, vestel toolbox telnet ftp which can’t connect probably as the TV has reset and no wifi connection has been set up yet?

Any advice or ideas would be great, I can’t even re-flash the firmware like before as i have no way of getting the TV to accept the ok command as i power up which makes it download from USB as no buttons work or no r/c, the keyboard moves the cursor around to get it on english but i can’t enter or yes it to get off that screen???

I am &&^&@@!!!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Risposta Più Utile


Wondering if you could replace the eeprom with a Master Recovery eeprom and see if that resolves the problem. I haven’t followed upon the information in the link so I don’t know if it is still relevant or not or what it costs. Just a thought.

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

Lee Marsh sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 76