Aggiusta le tue cose Community Store

Logitech G X56 HOTAS Throttle Switch Board Replacement

Introduzione

If the toggle switches on your Logitech G X56 HOTAS Throttle are unresponsive, stuck, or intermittently malfunctioning, the issue may stem from a faulty switch board. This guide will walk you through the process of replacing the switch board to restore full input functionality. Please note that this repair requires soldering, as the switches are directly connected to the board. Make sure you are comfortable with basic soldering techniques before beginning.

If you're unfamiliar with soldering, review the How To Solder and Desolder Connections guide and take appropriate safety precautions before beginning.

Cosa ti serve

  1. Logitech G X56 HOTAS Throttle Switch Board Replacement, Label Plate: passo 1, immagine 1 di 2 Logitech G X56 HOTAS Throttle Switch Board Replacement, Label Plate: passo 1, immagine 2 di 2

    • Remove the eight 8.6 mm long 1.5 mm hex screws from the label plate.

    Modifica

  2. Logitech G X56 HOTAS Throttle Switch Board Replacement: passo 2, immagine 1 di 1

    • Use an opening tool to pry off the mode switch knob.

    Modifica

  3. Logitech G X56 HOTAS Throttle Switch Board Replacement: passo 3, immagine 1 di 3 Logitech G X56 HOTAS Throttle Switch Board Replacement: passo 3, immagine 2 di 3 Logitech G X56 HOTAS Throttle Switch Board Replacement: passo 3, immagine 3 di 3

    • Remove the eight 12.5 mm long Phillips #1 screws from the underside of the label plate.

    • These screws are plastic! Be very careful when applying force.

    Modifica

  5. Logitech G X56 HOTAS Throttle Switch Board Replacement: passo 4, immagine 1 di 2 Logitech G X56 HOTAS Throttle Switch Board Replacement: passo 4, immagine 2 di 2

    • Place the throttle right side up again, using the bottom panel as a coaster.

    • Gently pry the label plate from the body of the throttle.

    Modifica

  6. Logitech G X56 HOTAS Throttle Switch Board Replacement, Switch Board: passo 5, immagine 1 di 2 Logitech G X56 HOTAS Throttle Switch Board Replacement, Switch Board: passo 5, immagine 2 di 2

    • Remove the 14 mm nuts at the base of the switches.

    Modifica

  7. Logitech G X56 HOTAS Throttle Switch Board Replacement: passo 6, immagine 1 di 1

    • Disconnect the connectors and de-solder the one black wire.

    Modifica

  8. Logitech G X56 HOTAS Throttle Switch Board Replacement: passo 7, immagine 1 di 1

    • Remove and replace the toggle switch daughterboard.

    Modifica
Conclusione

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

Altre 2 persone hanno completato questa guida.

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 21

Tutti i Tempi: 139