Aggiusta le tue cose Community Store

Digiland DL1168A Front/Rear Camera Replacement

Introduzione

Use this guide to replace the front or rear camera on your Digiland DL1168A tablet. If your device is experiencing issues such as blurry images, failure to open the camera app, or complete camera malfunction, replacing the faulty camera module may resolve the problem. This guide will walk you through the process step-by-step with detailed instructions and photos to ensure a safe and successful repair. Before starting, make sure your tablet is powered off and fully disconnected from any power source to avoid electrical damage or injury.

Cosa ti serve

  1. Digiland DL1168A Front/Rear Camera Replacement, Rear Case: passo 1, immagine 1 di 1

    • Using an opening tool, begin softly prying open device by first inserting it in between the front and back panels.

    • Continue prying the edges while moving around the device's perimeter until the back can be easily removed.

    Modifica

  2. Digiland DL1168A Front/Rear Camera Replacement: passo 2, immagine 1 di 2 Digiland DL1168A Front/Rear Camera Replacement: passo 2, immagine 2 di 2

    • Carefully lift back panel away from the body of the device.

    • Be gentle when lifting the back panel. The speaker wires are still connected to both the front and back panel.

    Modifica

  4. Digiland DL1168A Front/Rear Camera Replacement: passo 3, immagine 1 di 2 Digiland DL1168A Front/Rear Camera Replacement: passo 3, immagine 2 di 2

    • Desolder the four wires connecting the rear case to the motherboard.

    • Disconnect the wires from the motherboard.

    • Remove the rear case from the device.

    Modifica

  5. Digiland DL1168A Front/Rear Camera Replacement, Front/Rear Camera: passo 4, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Acquista

    • Use tweezers to remove the cover that keeps the camera lens in place.

    Modifica

  6. Digiland DL1168A Front/Rear Camera Replacement: passo 5, immagine 1 di 1

    • Use tweezers to gently begin to lift the back piece off.

    • Lift gently because the lens is connected to the back piece by a small cord.

    Modifica

  7. Digiland DL1168A Front/Rear Camera Replacement: passo 6, immagine 1 di 1

    • After lifting gently both the lens and the back piece will be removed.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0Commenti sulla guida

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 221