Modifica Klein USB Digital Meter ET920

This device can be used to test to verify the voltage from USB-A & USB-C ports along with the current being drawn and the watt-hours of a device plugged into it.

NOTE: This will measure voltage on a USB-A port with no load attached but it must have a USB-C load attached to check a USB-C port.

* 3 to 20V DC; Current: 0.05 to 3A (USB-A); 3 to 20V DC; Current: 0.05 to 5A (USB-C)
* Continuously monitor up to 1000 hours of voltage, current, capacity/charge delivered, energy, and resistance (calculated)
* Tests most common standard USB-A or USB-C ports, including Qualcomm Quick Charge® ports
* Store and recall up to 10 readings
* Voltage and current overload detection
* Hi-resolution LCD for clear visibility in environments with low ambient lighting
* Device must be used in line between source being measured and power source
* Rugged, pocket-sized, and light weight Klein industrial design stands up to jobsite demands
* Built to withstand a 6.6-Foot (2m) drop
* No batteries needed; powered by the USB port being tested

Documenti Allegati

2 Documenti Aggiungi un Documento

USB Meters ET900 ET910 ET920 RSell Sheet 82809

Klein920

Italiano

Titolo della pagina

Mostra Titolo

Sommario

Informazioni Aggiuntive

Intestazione 2
Bold
Italic
List
Numbered list
Collegamento
Video
Media

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.