Brushbar
|
2 Risposte Punteggio 6 |
Wand has no suction |
|
4 Risposte Punteggio 3 |
How to put the wand back in place. |
|
1 Risposta Punteggio 0 |
What is a Red C clip and where is it located |
|
2 Risposte Punteggio 0 |
Why is suction too strong on Dyson DC25? |
Ricambi
Strumenti
Questi sono alcuni strumenti di uso comune usati per lavorare su questo dispositivo. Potrebbe non essere necessario ogni strumento per ogni procedura.
Modelli
Ball Multi Floor
Background
The Dyson Ball Multi Floor Upright Vacuum was released in 2012 and can be identified by the Dyson tag DC40. It is very similar in design and mechanical operation to its earlier counterpart, the DC41 Animal. It is well known for utilizing the Dyson Ball technology while using V8 suction. It has an orange color and is fairly lightweight while remaining a full size vacuum and most distinctively having the strongest suction of any vacuum. It has been known to fail by losing suction, turning on and off on its own, not supporting its own weight and remaining upright, not turning on, and the brush bar not turning.
Identification
To ensure that you have found the correct repair guide for the right device, make sure that there are the words Dyson Ball Multi Floor imprinted into the top front of the bottom portion of the vacuum near the suction.
Additional Information
Dyson's Support Page for Dyson Ball Multi Floor Upright Vacuum
Team
Cal Poly, Team 21-2, Maness Winter 2017 Membro di Cal Poly, Team 21-2, Maness Winter 2017
CPSU-MANESS-W17S21G2
4 Membri
10 Guide realizzate
