Phonetech93

Hello everyone, Just done my first ipad repair, and when i tried to remove the digitizer, but when i pried the clips, it brok...

Hello, Little question, my customer have a galaxy core lte with screen damaged, and verry verry broken, so my question is, do...

Hello, I changed lcd to my client for iphone 6, 1 month later, he come back telling me the home button is sticked to the lcd....

Hi, as everyone know, iphone 5 serie frame is very very fragile. i just changed 5s lcd to a client and his frame was very ver...

Hello everyone. Just little question, i've seen many peoples talking about changing the LCD of iPhone 6+ will make the home b...

Everyone, What is your best tip to connect the LCD and digitizer flex cable connector to the motherboard, easily without DAMA...

Hello everyone, I would like to start micro soldering, i have phone compagny but sometime we broke some chip during repair. W...

Hello to everyone, My problem is, before i replaced the battery and the LCD, everything on my iPhone 5C worked fine (power lo...

Hello everyone, I just tried to change my iPhone 5C battery yesterday and i damaged a chips on the board so my iphone not wor...

Replace the battery is the first step to do. Then, if still not working, should be IC or water damage.

The tech who replaced your screen broken it again. There is no other option if you have grey line in your screen.

If you can't connect to a cellular network on your iPhone, make sure that cellular data is on in Settings > Cellular*. On your iPad, go to Settings > Cellular Data. Reset your Network Settings. Tap Settings > General > Reset > Reset Network Settings. This also resets Wi-Fi networks and passwords, cellular settings, and VPN and APN settings that you've used before. Try updating your phone. If still not working, it look like water damage. Even you think there is no water damage, note that only small drop of rain water can enter in the device and make corosion. But anyway, i would suggest to take a look to SIM tray as last.

Any help please :( ?

Please help me i really need to know :(

Make a restore of your iPhone before doing anything... And it look like you are looking for this post: battery draining, and missing components near the battery connector

Wipe all data factory reset

The LCD is broken. You have to replace it.

You are in DFU mode. To exit DFU mode, press home button and power button in same time for 7 sec, then release the power button and still pressing home button until the iTunes logo disapear.

Corrosion. You only way to MAYBE fix this, it is by using isopropyl alcohol on corrosion on motherboard.