A sudden shutdown issue on your Acer Aspire E1 series laptop can be caused by various factors, and troubleshooting the problem may require some investigation. Here are some common reasons and steps to address the issue: Overheating: Overheating is a common cause of sudden shutdowns in laptops. When the temperature inside the laptop becomes too high, it automatically shuts down to prevent damage. To address this: Ensure the laptop is placed on a hard, flat surface to allow for proper airflow. Clean the laptop's cooling vents and fan regularly to remove dust and debris that can obstruct airflow. Consider using a laptop cooling pad to help dissipate heat. Power Issues: Check if the laptop's battery is properly seated and not loose. Test the laptop with a different power adapter and cable to rule out a faulty charger. Make sure the laptop is not set to shut down automatically when the battery reaches a low percentage in the power settings. Software or Driver Conflicts: Ensure that your operating system and...

Experiencing excessive heat when charging your iPhone 11 after replacing the battery can be concerning. While it's possible that you received a faulty battery, there are also other factors to consider that might be contributing to the issue: Battery Quality: It's important to ensure that you purchased a high-quality, reputable battery for your iPhone 11. If the replacement battery is of inferior quality or not designed specifically for the iPhone 11, it can lead to overheating issues. Installation: Ensure that the battery replacement was done correctly, and all connectors and screws are properly secured. If there is any misalignment or loose connections, it can lead to heat generation during charging. Calibration: While you mentioned calibrating the new battery, sometimes the battery calibration process may not work correctly if the replacement battery is not detected properly by the phone's software. This can lead to erratic behavior, including overheating. You may want to try recalibrating the battery by...

If your Nintendo 64 (N64) system is having trouble playing some games while others work, it could be due to several factors, including cartridge condition, system issues, or compatibility problems. Here are some steps to help diagnose and potentially resolve the issue: Cartridge Condition: Even if a game is sealed in plastic wrap, it's possible that the contacts on the cartridge have become dirty or oxidized over time. Try cleaning the game cartridges themselves using isopropyl alcohol and a cotton swab. Gently rub the contacts to remove any dirt or corrosion. Cartridge Slot: You mentioned using compressed air to clean the cartridge slot, which is a good step. However, sometimes the issue may require more thorough cleaning. You can try using a specialized cleaning kit for cartridge slots, which includes cleaning solutions and brushes designed for this purpose. Be sure the console is turned off and unplugged when cleaning the slot. Check for Bent Pins: Inspect the cartridge slot on the N64 itself for any...

If your Nokia G310 5G is operating very slowly, there could be several reasons for this issue. Here are some common factors to consider and steps to improve its performance: Insufficient Storage: If your phone's internal storage is nearly full, it can slow down its overall performance. Try deleting unnecessary apps, photos, and files to free up space. Too Many Apps Running: Running too many apps in the background can consume system resources and slow down your phone. Close background apps by going to the multitasking view and swiping them away or use the "Clear All" option if available. Outdated Software: Ensure that your phone's operating system (Android) and apps are up to date. Manufacturers release software updates to improve performance and fix bugs. To check for updates, go to Settings > System > Software update. Heavy Apps or Games: Some apps and games are resource-intensive and can slow down your phone, especially if it has lower-end hardware. Consider uninstalling or disabling such apps if you...

If your Honor phone is stuck on the logo screen when turning it on, it could be due to several reasons. Here are some common causes and steps you can take to try and resolve the issue: Software Glitch or Crash: Sometimes, the phone's software can encounter a glitch or crash during startup. To address this, try the following: Force Restart: Depending on your Honor phone model, you can perform a force restart by pressing and holding down the power button and volume down button simultaneously for about 10-15 seconds. This should force a reboot and might help resolve the issue. Low Battery: Ensure that your phone has enough battery charge. If the battery is critically low, the phone might not start up properly. Plug it into a charger for a while and try turning it on again. Corrupted System Files: If there was an issue with a recent software update or if system files are corrupted, you may need to perform a factory reset. Keep in mind that this will erase all data on your phone, so it's important to have a...

It could be alot of things. Here is what you can check: Inspect Brake Pads and Rotors: Worn-out brake pads or warped brake rotors are common causes of brake vibration. Have a mechanic check the condition of your brake pads and rotors. If they are worn or damaged, they may need to be replaced. Check for Brake Caliper Issues: Inspect the brake calipers for any signs of sticking or malfunction. If a caliper is not releasing properly, it can lead to uneven brake pad wear and vibrations. Wheel Balance and Alignment: Ensure that your wheels are properly balanced and aligned. Unbalanced or misaligned wheels can cause vibrations when braking. Have the tire balance and alignment checked and adjusted if necessary. Inspect Suspension Components: Problems with the suspension system, such as worn-out bushings or shock absorbers, can transfer vibrations to the brakes. Have the suspension components inspected for wear or damage. Examine Tires: Unevenly worn or damaged tires can affect braking performance and lead to...

Usually if its stuck (frozen) in operating system you will have to force restart it. You will do it by pressing and holding power off button for 8-15 seconds. This way it will turn off and after that you turn it on. I hope it resolves your issue.

Maybe your backlight is gone. Use flaslight and point it to your screen when laptop is turned on and see if there is image on it. If you can barely see image then your backlight is gone and you will have to take it to someone to replace it.

Not sure if you know how to replace it but you will need soldering skills (hot air). Heat up board from beneeth (side below the switch),

Can you move inside bios or is it just frozen when you enter bios? Try totaly reseting your bios by opening computer case and removing coin cell battery for couple of minutes.