Questo utente non ha ancora compilato il proprio profilo.
Risposte
try clearing the cache memory on the phone by going into the settings of the phone and scroll down till you get storage and enter then scroll till you get cache memory and enter and select delete cache or clear cache memory and then restart your phone and this should help with your issue and if you dont see a significant improvement in the speed of your phone then try uninstalling and deleting apps you no longer use or use very seldom. and remember to clear the cache and restart your phone after uninstalling any apps. please let me know how it goes thanks
Per saperne di piùtry the following (1) Charge your Samsung phone to 100% battery left and turn off the device. (2) Press down the “Volume-up”, “Power” and “Home” buttons to access Recovery mode. (3) Use the “Volume-up” and “Volume-down” buttons to choose the “wipe data/factory reset” option. (4) Again, select “wipe cache partition” using the “Volume-up” and “Volume-down” buttons. (5) Tap on the “Reboot System Now” option to reboot your phone (6) and then see if the phone still restarts itself. should the above method not fix the problem then try the following (1) Go to Settings on your Samsung. (2) Find and click Software update/System updates. (3) Tap Download and install (4) After the update file is downloaded, just follow the on-screen instructions to install it on your phone. (5) After restarting, check if your Samsung phone is running normally and stop turning off then on. I hope this helps you with your problem if the problem still persists then it can only be a hardware issue and you will have to take it into a...
Per saperne di piùIt sounds like it could be a malfunctioning fan on the power supply which is causing the power supply to over heat, which can cause a computer to shut down unexpectedly. maybe get the power supply tested, and if it is faulty i would strongly suggest replacing it asap. because it will start to damage other components of the PC and can become costly to fix. And if the power supply is working 100% then the next possibility is either, issues with a driver and or malware and for that i would suggest running a diagnostics on your pc and take it from there. I hope this helps you in resolving your problem and please let me know of the outcome. Thanks
Per saperne di piùIt might be the accessibility settings go to your settings menu and scroll down till you find the accessibility menu and select it and then select the visions menu and turn off any of the contrast options as well as the color correction options. I hope this fixes your problem.
Per saperne di piùIt can also be a problem with the switch connection make sure all the wires are connected properly and make sure the switch is working 100%
Per saperne di piùWhen did this problem start did you just have something replaced on the phone or did you do an update on the software? If you have done any of these things then it's most likely a software issue and you will need to have the software reinstalled. If you have not done any of the above then the problem is with the screen itself especially need to check the connector plug on the main board if not the plug then it is the actual screen that is damaged and will need to be replaced. Please post update as to whether your issue was resolved.
Per saperne di piùIt has most probably come off the bracket and or the window winder rail you will have to remove the door panel so you will have access to the rail system and put the window back in the correct place on the railing or it could be (less likely) that the railing bracket has broken somewhere and if so the railing system will need to be replaced or fixed if possible. Please post an update as to whether your problem was resolved
Per saperne di piùIt sounds like perhaps a fuse has blown and will need to be replaced before resetting anything and if all the fuses are ok check all the globe's starting with the 4 indicator globe's (sometimes the main computer is affected by an unsteady electric current and this causes havoc with the entire electric system) I hope this solves your problem , please post an update, informing if your problem was resolved. Update (05/04/2022): The BSI unit is basically a computer which handles a multitude of functions such as odometer value, central locking, lights and immobiliser. Some later Bsi units are liable to corrupt their own software program if not “woken up” in a specific way after programming keys or battery disconnection. 1. leave key in off position in ignition 2. Put the driver’s window down, lift the bonnet and ensure all equipment is switched off. 3. Ensure all doors are closed and remove key from the ignition. 4. Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds. 5. Reconnect the vehicle...
Per saperne di più