Le Mie Guide Preferite
Rispondi a "No Sound from Mac Mini!"I had the same problem with a Core Solo machine. Turns out the people who installed some RAM (this was before I discovered ifixit) had not properly seated the ZIF cable in its socket. Steps 7 and 8 in the Audio Board install (Mac mini Model A1176 Audio Board Replacement) are where the solution lies. There is a painted line on the ZIF cable. Before you close the cable lock, make sure the cable is fully inserted - the painted line will be about 1mm above and parallel to the top of the socket. Push down the clip and all should be well.
Rispondi a "Can my 1.5Ghz SoloCore be upgraded to a DualCore processor?"I upgraded a Core Solo 1.5GHz with a T7600 Core 2 Duo 2.33 GHz. The guide here on ifixit is well done, and along with the notes on each step, it was all I needed to do the work. I would say having the proper tools helps a lot. Who knew a spudger was so important :) Gary O'Brien Photographer Charlotte, NC
Rispondi a "Mac CPU upgrade speed?"I also just installed a T7600 2.33 GHz, and it was pretty much by the book. Read all the notes in each step before you do the step - they are a big help. Also upgraded RAM and HD. The little machine is stepping along quite nicely now. Gary O'Brien Photographer Charlotte, NC