bone apple tea

I replaced the thermal paste on my laptop, and it overheated quite intensely. It hardly booted up. I assumed I didn’t...

I thought I would replace my thermal paste because it’s been 8 years and this laptop has not received any internal...

If I put the power cable in all the way, the fans will run (at full speed), but the screen will not turn on. If I move the...

I have a windows keyboard that seems to work fine when the computer is booted, but when I use Windows+R or any other...

It’s not really possible to do this. Also, the fact that one cell is swollen means that the others likely aren’t in good condition either. It’s unfortunately time for a new battery, sorry. They’re not expensive though, I did this repair on my 2012 MBA and it was only about $30.

You may have to replace the digitizer/lcd assembly. Here is a guide

Try resetting the SMC. If this does not work, you may have to replace the power supply.

Yes, it will function if you replace the logic board, but make sure you replace the FaceID sensor as well as the motherboard, because each faceid sensor is paired the logic board.

The logic board probably wasn’t completely dry when you powered it on. It was still wet, and now likely damaged.

Sounds like you need to replace the LCD. There is an iFixit guide on how to do this. Sostituzione dello schermo iPhone XR

Apple pairs the FaceID module to the phone. If the module is replaced, FaceID won’t work, and there’s no way to repair it without the original module that is paired to the phone. Apple can repair it, but it’s costly.

Check the connections to the screen inside the phone. If the connections are all fine, you probably need to replace the lcd.

This is a problem with the lcd. Unfortunately, it looks like it needs to be replaced