Gregg Stanley

There is also another connector directly to the right (in this photo) that needs to be disconnected as well (this picture shows it under the logic board, so this has already been removed and replaced before the photo was taken).

Disconnect battery first! (In this photo the battery has already been removed).

Umm….how do you remove the rear cover?

If you get the replacement screen with daughterboard attached you don’t need to solder anything.

First, DISCONNECT the battery before ANY connections, and the battery should be the last thing you re-connect. And you DO NOT need to remove the logic board.

There is a light adhesive around the edges so applying some heat to the plastic cover first (I use a hot plate at 80*c for about 5 minutes) and some alcohol along the edges will really help.

This is for the Xs model, not the Xs Max.

You should disconnect the battery before disconnecting any cables.

Yeah, like I have a laser machine.

Don’t forget the screw on the right edge towards the top.