Jaygrn, Sounds like a seating issue. I would remove and replace the sticks in reverse order ie place the top stick securely in the bottom position and the current bottom stick in the upper slot, ensuring that they are fully engaged and sound. Hope you get it sorted. Let me know if this resolves the issue. Andrew

Not familar with this item in particular but there are a few things worth checking; Is there a fuse in the plug if so is it okay Is the center pin in the small edison screw lamp holder free of any obstruction Make sure the centre contact is raised enough to make good electrical contact with the lamp If you still have an issue please check the connections to the lamp holder and that all connections to the switches and timer are sound. Also check any connections to the lid lock. Hope this helps

Hi Janie, If you have replaced the charge port on another phone, you should be okay. I would recommend a good quality low melt solder paste as this will make the removal of the shielding easier. (Just remember to remove all the low melt solder before soldering the new charge port on or you will have connection issues) Hope this helps