Le tue impostazioni
Ottieni un rapido accesso alle guide, ai componenti e alle risposte per i tuoi dispositivi
Sembra che il tuo carrello sia vuoto
The name of the tutorial was “How to Use a Multimeter", so it was mesnst to be an introductory glimpse into how to use a Multimeter. Specific testing of electronics, PCBs, and the like is outside of the scope of this article. However, given the basic understanding of how a mtimetsr works it would be reasonable to expect someone to be able to figure out how to test the circuit board.
Sometimes it's better to send two separate than overly complicated one.
Incorrect. The touch buttons on the S6 Edge are also on the daughterboard, but are not ribbons that attach to the screen frame (as with the S6). Instead, they are on the opposite side of the daughterboard and are pressed into place by the natural pressure of the board against the screen. This makes the replacement of a charging port much easier due to not having to remove the LCD from the frame, which is tedious. Replacing the home button is the same as on the S6 - you will have to remove the screen frame from the LCD to access it.
Quando lo avranno fatto, sarai in grado di visualizzare un grafico della reputazione guadagnata nel tempo da loro.
Ecco un'anteprima di come il grafico apparirà:
Ancora nessuna reputazione acquisita.