rbrtcoyne

rive rollers pivot yet don't get paper. The printer transmits noisy, pounding clamors. Printer lights are squinting. The carriage get together, which holds the ink cartridges, slows down at the left half of the printer. A paper jam may have happened already. The reason for the issue might be that the printer's grip actuator is separated. Take after the guidelines under "Re-drawing in the grip actuator" to re-connect with the grasp actuator.

If you'r printer isn't turn on then you can check first you wire is properly connected or not then Reconnect to power supply. Try unplugging the power wire, pausing for 15 seconds before reconnecting to wall.

Start with printer off Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on hold the Power button, release Resume Button. Without releasing the Power Button, double click “Resume” button and then release Both Buttons. Click “Resume” for four times then click “Power” button, to confirm the selected action (reset counter absorber).

With the mistake your printer is encountering, please kill the printer, unplug the force rope from the back and forget it for no less than 10 minutes, then connect it back to and walk out on. On the off chance that despite everything you encounter the same issue, the printer will shockingly oblige adjusting to determine the issue.

Make beyond any doubt that the stuck paper is not under the FINE cartridge holder. On the off chance that the stuck paper is under the FINE cartridge holder, move the FINE cartridge holder to the right edge or the left edge whichever is simpler to expel the paper. When you move the FINE cartridge holder, hold the FINE cartridge holder and slide it gradually to the right edge or the left edge. Hold the stuck paper with your hands. Pull the paper gradually not to tear it, then haul the paper out. Ensure that all the stuck paper is evacuated. Close the paper yield spread, then reload the paper.