Rep: 49
2
My hp pavilion elite m9500y has no video I tried to boot it up you can hear the fans and everything but there is no video. I think it is the cpu or the gpu
Questa è una buona domanda?
Rep: 450,2k
11
367
1,4k
Disconnect power from the PC and hold the PC power button operated for a full 30 seconds then release .
reconnect power and try starting
If OK check the coin cell battery on the motherboard is OK i.e. >2.5V
if not replace it
Questa risposta è stata utile?
Ultime 24 Ore: 1
Ultimi 7 Giorni: 2
Ultimi 30 Giorni: 8
Tutti i Tempi: 140
5 Commenti
Hi @superfixer334,
Have you tried another monitor, video cable etc?
Is the HDD activity light working?
Most likely it is the GPU card although if it failed they may have been a beep error code on POST.
da jayeff
I have tried a different monitor and cable and the hdd light is solid green and there is no beep on boot up
da Evan
@superfixer334
Can't find the manual so I don't know if there's supposed to be a single beep for a successful POST or not.
If not and there's no HP logo on startup it may not even be starting -motherboard?
If the HDD light flashes indicating it is booting into Windows then it's the GPU card. You could try starting in "safe mode" to check if it s a driver problem
da jayeff
The hdd light flashes one time I hold the power button down and my monitor does not get a Signal
da Evan
Wait sorry I got the power supply light mixed with hdd light I can’t find a hdd light
da Evan