Salta al contenuto principale

iPhone con schermo da 4" introdotto nel marzo 2016 con specifiche hardware simili a quelle dell'6s. Disponibile in Argento, Oro, Grigio siderale, Oro rosa con 16 o 64 GB. Modelli A1662 e A1723.

1051 Domande Visualizza tutte

Potential connectivity issues after front camera drilled out

This iPhone SE 1st gen was given to me in this state. The previous owner drilled the front camera out for privacy reasons. I do not have a SIM card with service to test cellular connectivity. I am unable to get my watch to pair via bluetooth and Wi-Fi randomly stops working with the switch grayed out in settings.

Block Image

Block Image

Block Image

Block Image

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 2
4 Commenti

Hi @guardian10

Could you upload some photos please by following this amazing guide Aggiungere immagini ad una domanda

Thanks:-)

da

@guardian10

Thanks for the photos:-)

Could you upload some photos of the inside too so we can see if it has and damaged antennas:-)

da

@hellomacos It looks like the drill bit didn't get past the camera's rear bracket.

da

@guardian10

maybe try disassembling it and cleaning it as you go

some dust and debris may have gotten in the hole:-)

da

Aggiungi un commento

1 Risposta

Risposta Più Utile

@guardian10 "with the switch grayed out" if they went to the extent of drilling through the camera I would not be surprised that they also "disabled" BT and WiFi by the IC or the antenna or within the WiFi circuitry. You do need to check on all of that as well.

Block Image

The image is best viewed when downloaded and opened in your own viewer due to its size.

Questa risposta è stata utile?

Punteggio 1

2 Commenti:

I don't think they disabled the Wi-Fi and Bluetooth, as they work most of the time, but randomly stop. It may be a board issue that was there beforehand.

da

@guardian10 okay sounds like you got that checked then. you do recognize that the " switch grayed out" will only apply when it is "not there" Sounds like a board issue.

@imicrosoldering what is your expert opinion on this situation :-)

da

Aggiungi un commento

Aggiungi la tua risposta

guardian10 sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 4

Tutti i Tempi: 132