Aggiusta la tua roba Comunità Store

Modello A1989, EMC 3358. Aggiornamento del modello esistente, con nuove opzioni per il processore e un cambiamento nei materiali della tastiera. Disponibile nei colori Argento e Grigio siderale. Rilasciato nel maggio 2019.

134 Domande Visualizza tutte

Opzioni

Missing Hall sensor mystery.

My MacBook Pro (A1989) should have two hall sensors on most extreme position of motherboard. I found out, that my MacBook has only one. The other sensor pins has just connected two connection positions (middle two facing towards display). From time to time, it happens, that when I close the lid, Mac falls to hibernation, but does not wake up, when I close the lid. I am puzzled.

I was wondering, where to get second sensor, or how to make this more stable. I guess current state with shorted pins is but unusual.

Can you help?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

Are you sure you selected the correct model here? This systems board number is 820-00850 Double Check. Take a picture of your boards hall sensor/s and where the missing one would be Aggiungere immagini ad una domanda

Block Image

Update (06/21/2021)

@Ivo Hanuška - Your board number doesn’t make sense!

As you can see for these systems all are 820-xxxxx (five digits) Apple loves hiding it and the very newest one have a new code system a QR tag and a four alphanumeric code.

Block Image

Questa risposta è stata utile?

Sì No
Punteggio 1

2 Commenti:

Hi,

My board has different number, but very similar (if not same) layout. My number is 1320-2746. Pins are shorted by some form of glue/varnish. I was measuring resistance of connection and it was about 2 ohms. I guess this is some form of quick fix of previous owner. Maybe they blocked this sensor somewhere in software, since I had to clear NVRAM and SMC few times. I have no Idea what components are on sensor sub board I can not guess what should be output with closed and opened lid.

I just do not know and I’m puzzled.

da

@Ivo Hanuška - Please post some images so we can see things.

da

Aggiungi un commento

Aggiungi la tua risposta

Ivo Hanuška sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 22

Tutti i Tempi: 282