I recently bought this mac, and I wanted to factory reset it. While it was rebooting, I accidentally unplugged it and the screen has not turned on since. I tried to do a PRAM reset, but it did not respond. I have tried to make a bootable disk, but that dod not work either. The fans spin and I think the magic keyboard connects to it but the screen stays black.
Questa è una buona domanda?
Rep: 482k
35
332
971
See if you can boot up in Safe mode, press Shift (⇧) key during startup
Reference: Mac startup key combinations
If that fails time to visit an Apple Store
Questa risposta è stata utile?
Rep: 686,1k
3,4k
1,1k
2,6k
Try using a wired USB keyboard (any will work), The driver for the magic keyboard probably is not loading. Then try rebooting in Recovery Mode and run Disk Utilities.
Questa risposta è stata utile?
Thanks for the response! Sadly, I tried this and the screen still stays black.
with the wired keyboard try Dans solution. that failing do a SMC & PRAM reset
Ultime 24 Ore: 0
Ultimi 7 Giorni: 1
Ultimi 30 Giorni: 5
Tutti i Tempi: 87
