No display after SSD upgrade
Seeking some help with a 2010 21.5 iMac. I installed a Samsung 500GB SSD drive and I disconnected the entire LCD screen to make it a little easier for me. Once I reconnected everything, the computer would power on and I heard the ding, but the display was black. After evaluating everything, I noticed the LVDS end that goes in to the motherboard was damaged
I looked at the connector on the motherboard and to the naked eye it looked to be in good shape
https://ibb.co/wy5xQcq and https://ibb.co/H4Ms02m
I ordered a replacement LVDS cable but I was still unsuccessful in getting a display. I wasn't sure which side of the cable was face up, so I tried both but again, neither worked. This is a pic of one of the sides
I checked the LEDs on the motherboard and the first three turn green but the fourth does not turn on
LED603 - https://ibb.co/rc5Gj1y
I believe this means there is no connection between the LCD and Video Card? Is it at all possible the SSD is causing the problem? I hold the option button down when I boot up but still no display. Fans turn on.
I reset the NVRAM during troubleshooting.
Are there any troubleshooting suggestions for this?
Thanks all!
Questa è una buona domanda?