Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

A1708/EMC 3164 — Released June 2017, this entry-level MacBook Pro retains its traditional function keys (as opposed to the OLED Touch Bar).

172 Domande Visualizza tutte

No battery detection with new Logic Board

Hi I have a A1708 with function keys. After dead logic board I ordered a used one of eBay. Replaced and booting up. First completely erased disc and made full install of delivered high Sierra. Then I saw that no battery is detected (PPT001 in diagnose). Boots up and schows 100% and X in battery symbol. At a short moment it showed battery 0%. Made SMC reset…nothing. High chance of high discharged status of the battery but my usb c tool only shows 0,5A when running…so it’s definetely not charging.

what is the problem with “new” logic board and old battery ? Is there any workaround? Thx on advance

Update (12/14/2019)

Block Image

Looks like there is something wrong with dates?

Had the Problem with date at new installation of High Sierra with “CERT” failure because date was set to 19xx.

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 1


Run CoconutBattery and post a snapshot here for us to see Aggiungere immagini ad una domanda


Does coconut Display different results than System report? System report says no battery detected


It offers a better view and boils it all down into a more compact screen. Please let's see what it shows us.

For reference: Battery suddenly not recognized. MBP Fn 2017 which has a similar problem.


Posted it down below. Strange thing is, when I start up and the apple logo and statusbar is on screen and I pull the cord, then it loads till system is "up"...then it shuts off.


@BenjaminS - This makes sense! When you disconnect the USB-C power cable the system looses its settings so the date reverts to the default 1979.


Mostra altri 4 commenti

Aggiungi un commento

1 Risposta

Risposta Più Utile

You need to replace the battery as the micro controller within it is not working so its not charging properly. Here’s the needed part MacBook Pro 13" Retina (Function Keys, Late 2016-2017) Battery you’ll need to reference this guide Sostituzione batteria nel MacBook Pro 13" Function Keys versione fine 2016

Immagine MacBook Pro 13" Retina (Function Keys, Late 2016-2017) Battery


MacBook Pro 13" Retina (Function Keys, Late 2016-2017) Battery


Questa risposta è stata utile?

Punteggio 1


Are you sure ? Before replacing the Board everything worked fine. Are there any probe points or another way to test the battery? When I measure simple at the two contacts on the Battery board I get 5,8 V ...seems a little to low? Does anyone have voltages to test ?


Sorry you've damaged it somehow.


Starting in single user mode and pulling cord stays on. Only when exit single user mode shuts off


OK, so what does CoconutBattery say in Single User?


Thank you dan for your advice.


It was the “Data-Cable” which connects Battery and Main Logic-Board. Just replaced it with a new one and its working again.


Mostra 1 altro commento

Aggiungi un commento

Aggiungi la tua risposta

BenjaminS sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 12

Tutti i Tempi: 87