FaceID/earpiece flex cable broke. Is it possible to fix?

Question

iPhone X

Lanciato il 4 novembre 2017. Modello A1865, A1901. Disponibile con GSM o CDMA / 64 o 256 GB / Colore Silver o Space Grey. Si pronuncia "iPhone 10".

Rep: 1

Opzioni

So the cable snapped off when I tried to disconnect the display. Does this mean this phone will never get get FaceID working again?

I obviously have the original sensors, but I guess it’s not possible to replace just the flex cable?

Questa è una buona domanda?

Sì No

Punteggio 0

Mark @mark85953 Rep: 133 3 · Answer 1 · 2019-12-09T03:10:41-07:00

Rep: 133

3

Opzioni

It depends on if the cable is plug in type or soldered in. You can replace it if the part is available yet.

Questa risposta è stata utile?

Sì No

Punteggio 0

viona @viona Rep: 526 9 3 1 · Answer 2 · 2020-03-20T23:18:51-07:00

Rep: 526

9

3

1

Opzioni

Actually you can transplant these sensors onto a new flex cable. As described in the repair guide.

‘Prepare a new flex cable. Apply some Paste Flux to the bonding pad and solder the detached Flood illuminator module. ‘

Questa risposta è stata utile?

Sì No

Punteggio 0