Aggiusta la tua roba Comunità Store

A1706/ EMC 3071 — Lanciato nel novembre 2016, questo MacBook Pro introduce la Touch Bar OLED. Ha CPU Intel Core i5 dual-core "Skylake"e 4 porte Thunderbolt.

239 Domande Visualizza tutte

Opzioni

Water damage to screen?

A few days ago, I acquired a “water-damaged” A1706. There seems to be no obvious issue inside the main body, and the laptop functions perfectly on an external monitor. The screen, however, is malfunctioning. When I first turn it on, there is only about 0.5” of distorted display showing at the top:

Block Image

If I warm the screen with a hairdryer aimed at the upper-half of the right bezel, the full display gradually flickers into life:

Block Image

With sufficient heat, all the artifacts disappear and the screen looks perfect, but when it starts to cool, the flickering and horizontal lines re-appear. I have attached a few photos to demonstrate.

My question is two-fold. Firstly, is this a known and predictable pattern of failure? Secondly, is it user-repairable (advanced DIY), or will I simply have to replace the screen?

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

1 Risposta

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

I haven’t seen your exact problem but I can explain what it is. Looking at this picture we can see the basics on how an LCD screen works:

Block Image

Starting from the right 6 is the backlight source and 5 is a polarizer filter collimating the light in one direction, then the light passes through the rear glass plate 4 that sandwiches the liquid crystal medium 3 with the metal oxide electrodes and the thin film switching transistors 2 and then the front cover glass and the front polarizer 1.

Here the rear polarizer 5 sheet has curled along the edge from what ever got in so its not laying flat. When you heat up the panel the curl is removed. The upper part of the screen is caused by liquid damage on the panel its self causing signal leakage between the lines.

Sadly, this display is not repairable as its sealed. You’ll need to replace the full display assembly which is around $600. Here’s the needed guide to replace it Sostituzione gruppo display del MacBook Pro 13" Touch Bar versione fine 2016

Questa risposta è stata utile?

Sì No
Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

Eric sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 29

Tutti i Tempi: 1,565