Aggiusta la tua roba Comunità Store

Lanciato il 25 settembre 2015. Modello A1688/A1633. Si ripara in modo simile alle generazioni precedenti, richiede cacciaviti e strumenti di apertura. Versioni GSM o CDMA /16, 32, 64, 128 GB / Oro rosa, Oro, Argento, Grigio siderale.

2690 Domande Visualizza tutte

Opzioni

Can the camera be connected to other devices?

Long story short, i found a discarded back half of an iphone, and i thought, it would be a shame to let those brilliant devices go to waste.

Is there any way of being able to connect the 821-00027 camera to other devices? eg, somehow connect it to a USB (without the phone, seeing as its pretty much all missing) and connect to a PC or raspberry pi etc.

Alternatively, is there a detailed guide somewhere for the pins such that i could somehow form a connection to a USB lead my self?

Thanks in advance!

Rispondi a questa domanda Anch'io ho questo problema

Questa è una buona domanda?

Sì No
Punteggio 0
Aggiungi un commento

2 Risposte

Filtra per:
Più utili Più recenti Più Vecchio
Risposta Più Utile

Opzioni

unfortunately, no, as Apple has specifically designed the pins to only connect and work with the specific 6s logic board.

Questa risposta è stata utile?

Sì No
Punteggio 1

1 Commento:

but what i mean tho, is that is there a way to connect up the pins, such that power can be delivered to the cam, and data extracted, and then using software converted into a version that windows or something else can read it. ie, pin connection i done believe should be much of an issue so long as we know what pins do what. the majority of the issue i suspect should be software

da

Aggiungi un commento

Opzioni

The pin layout can be found on the iphone board schematics, however the signal timing specifications, data and control protocols are not known. If it is a generic CMOS, you may be able to find a datasheet from the supplier. If Apple implemented any kind of custom controls, good luck finding that.

Basically you need to implement a custom debug board as a camera controller and video/photo encoder and a generic camera device. Beyond that you have to do all the camera/image processing on the PC. The project can easily cost hundreds of thousand dollars if you ALREADY has documentation of all parts. This is clearly not the case, I doubt anyone has done any ground work so you are on your own.

Questa risposta è stata utile?

Sì No
Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

farshad94abedi sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 46